Vehicles equipped with Chrysler 45RFE, 545RFE, 65RFE, 66RFE and 68RFE transmissions can develop low cooler flow at idle and/or overheated fluid issues after performing aftermarket reprogramming or 'tuning' the PCM/TCM for heavy duty use. Aftermarket programming typically commands a minimum of 100 psi at idle, which the OE pressure regulator cannot provide. This causes the valve to restrict the connection to the converter circuits, resulting in low cooler flow, fluid overheating, and converter crowding that causes stall at idle. Additionally, poor line pressure control can be the result of excessive wear in the pressure regulator valve bore. This wear allows critical oil loss, which can cause lowered line pressure, soft shifting and burnt clutches, or high line pressure and harsh shifts.
Reconditioning the bore and installing Sonnax oversized lube regulated pressure regulator valve kit 44912-15K restores pressure regulator action for line pressure control in all ranges. This valve has an internal check valve that ensures proper converter and lube oil flow under extreme 'tuned' operating conditions, eliminating the fluid overheat and converter related engine stalls at idle. This check valve reseats properly to seal the converter at engine off, eliminating the delayed engagements and converter drainback issues that arise from the outdated technique of drilling a hole in the casting wall between line and lube circuits.

Hardcoat anodized aluminum valve combats premature wear
Charges the converter/lube circuits at low RPM, especially important in 'tuned' vehicles
Improves converter feed/lube oil flow at critical low RPM and high load conditions
Redesigned valve prevents fluid drainback & slow engagements
Annular grooves help center valve in bore to reduce side-load wear
Kit includes selective springs for OE pressure, or for use with Sonnax line pressure booster kit, RFE-LB1

More From This Category

Sonnax Friction Ring, Nissan, 9.500in. X 8.250in. X .066", Hte Material, Each

Sonnax Friction Ring, Nissan, 9.500in. X 8.250in. X .066", Hte Material, Each

$18.02

Sonnax Friction Ring, Subaru, 9.250in. X 8.312in. X .045", Each

Sonnax Friction Ring, Subaru, 9.250in. X 8.312in. X .045", Each

$15.52

Sonnax Balance Weight, 150G, W/ Holes

Sonnax Balance Weight, 150G, W/ Holes

$48.09

Sonnax Friction Ring, Mitsubishi, 9.625in. X 8.375in. X .045", Hts Material, Each

Sonnax Friction Ring, Mitsubishi, 9.625in. X 8.375in. X .045", Hts Material, Each

$20.80

Sonnax Thrust Washer, 6T70/75, 6F50/55, Tf-80/81Sc, Oth, Each

Sonnax Thrust Washer, 6T70/75, 6F50/55, Tf-80/81Sc, Oth, Each

$10.92

Sonnax Balance Weight, 80G, W/ Holes

Sonnax Balance Weight, 80G, W/ Holes

$39.47