To suit Ford Big Block
Important Lifter Preparation Notes:Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams OLDS / PONTIAC LIFTER

Crow Cams OLDS / PONTIAC LIFTER

$11.82

View
Crow Cams Hydraulic Flat Tappet Anti-Pump Up Lifters

Crow Cams Hydraulic Flat Tappet Anti-Pump Up Lifters

$179.75

View
Crow Cams FORD LIFTER

Crow Cams FORD LIFTER

$116.41

View
CROWCAMS Lifter Hydraulic, For Holden Red, Blue, Black 6, V8, .840 in. Body Dia, Flat Tappet, 320 Max. Pressure, Set of 12

CROWCAMS Lifter Hydraulic, For Holden Red, Blue, Black 6, V8, .840 in. Body Dia, Flat Tappet, 320 Max. Pressure, Set of 12

$116.80

View
Crow Cams FORD HYD LIFTER 8 CYL SET

Crow Cams FORD HYD LIFTER 8 CYL SET

$127.72

View
Crow Cams HOLDEN LIFTER SET

Crow Cams HOLDEN LIFTER SET

$144.21

View