The proper length pushrod is critical to achieving correct valvetrain geometry. Trick Flow one-piece chromoly pushrods are available in a variety of lengths for use with all high performance applications. The pushrods are cold-formed from 4130 chromoly steel with a .080 in. wall thickness for strength and durability. Plus, the oil hole is closed to within .040 in. then drilled and chamfered to .093 in. to eliminate stress fractures and cracks before being induction-hardened and heat-treated for use with guideplates. These pushrods are available in 5/16 in. diameter in any length from 6.250 in.-9.000 in. and in 3/8 in. diameter between 7.650 in.-9.950 in. in .050 in. increments.

More From This Category

CROWCAMS Pushrod, 9.600 x 3/8 0.80 in. Wall, 210 Radius, Each

CROWCAMS Pushrod, 9.600 x 3/8 0.80 in. Wall, 210 Radius, Each

$17.41

View
Wilwood Pushrod, Master Cylinder, 3/8-24X2.456 Length, Diecast Tandem

Wilwood Pushrod, Master Cylinder, 3/8-24X2.456 Length, Diecast Tandem

$9.53

View
CROWCAMS Pushrod, 6.200 x 5/16 in..080 in. Wall, 210 Radius, Each

CROWCAMS Pushrod, 6.200 x 5/16 in..080 in. Wall, 210 Radius, Each

$13.52

View
COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 9.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 9.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$277.11

View
Crow Cams Pushrod, 8.500 Length, 3/8in. Diameter, .138 Thick, 210 Radius, each

Crow Cams Pushrod, 8.500 Length, 3/8in. Diameter, .138 Thick, 210 Radius, each

$19.40

View