The Holley LS3 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application. The front entry plenum flange has a 105 mm opening to work with throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The LS3 Ultra Lo-Ram is constructed to provide a very low profile modular intake manifold suitable for fabrication of special throttle body adapters or inlet ducts for custom installations. Available with single or dual injector provisions and a burst panel flange options.The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.

Features:
  • Designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads
  • Provides best performance for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm, depending on the application
  • Single-injector, high-volume fuel rails with mounting hardware, 8 AN o-ring ports
  • Modular LS3 Lo-Ram design allows customization for user desired configurations
  • Low height & compact packaging allows installation in most applications often under stock hoods
  • Available with both as-cast satin and black power-coat finishes
  • Billet options for the top and throttle body adapters are available seperately.
  • More From This Category

    Weiand Intake Manifold, Carb, Hi-Ram, 8.81/9.25 in. Height, 2500-8000 RPM, For Ford Cleveland, Satin, Each

    Weiand Intake Manifold, Carb, Hi-Ram, 8.81/9.25 in. Height, 2500-8000 RPM, For Ford Cleveland, Satin, Each

    $1,271.99

    Weiand Intake Manifold, Carb, Low Rise, 4.28/5.36 in. Height, 1500-7000 RPM, For Ford Cleveland, Satin, Each

    Weiand Intake Manifold, Carb, Low Rise, 4.28/5.36 in. Height, 1500-7000 RPM, For Ford Cleveland, Satin, Each

    $739.19

    Edelbrock Intake Manifold Big Victor Spread-Port Aluminium Single Plane for Use On Big Duke Heads Only For Chevrolet Each

    Edelbrock Intake Manifold Big Victor Spread-Port Aluminium Single Plane for Use On Big Duke Heads Only For Chevrolet Each

    $940.52

    Edelbrock Intake Manifold, Performer RPM, Dual Plane, Aluminium, Natural, Square Bore, Mopar, 361/383/400, Each

    Edelbrock Intake Manifold, Performer RPM, Dual Plane, Aluminium, Natural, Square Bore, Mopar, 361/383/400, Each

    $674.16