Hydraulic Flat Tappet Anti-Pump Up Lifter
Available in a set of 12 or 16

Set of 12 to suit Holden 6cyl Red, Black/Blue engine
Set of 16 to suit Holden V8 253-308 and 304/355 VN Heads

Important Lifter Preparation Notes:Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams PONTIAC HYD LIFTER 8 CYL SET

Crow Cams PONTIAC HYD LIFTER 8 CYL SET

$182.88

View
COMP Cams Race Hydraulic Flat Lifter For Chevrolet Small and Big Block

COMP Cams Race Hydraulic Flat Lifter For Chevrolet Small and Big Block

$206.84

View
Crow Cams Hydraulic Flat Tappet Anti-Pump Up Lifters

Crow Cams Hydraulic Flat Tappet Anti-Pump Up Lifters

$179.75

View
CROWCAMS Lifter Hydraulic, GM For Chevrolet, .840 in. Body Dia., Flat Tappet, 320 Max. Pressure, Set of 12

CROWCAMS Lifter Hydraulic, GM For Chevrolet, .840 in. Body Dia., Flat Tappet, 320 Max. Pressure, Set of 12

$116.80

View
Crow Cams HOLDEN LIFTER SET

Crow Cams HOLDEN LIFTER SET

$144.21

View
Crow Cams CHRYSLER HYD. LIFTER

Crow Cams CHRYSLER HYD. LIFTER

$12.03

View