Set of 12 to suit Holden 6cyl Red, Black/Blue solid camshafts
Set of 16 to suit Holden V8 Red, Black/Blue, Chev Small block and Big Block solid camshafts

Important Lifter Preparation Notes:
Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams GM SOLID LIFTER ULTRALIGHT EDM

Crow Cams GM SOLID LIFTER ULTRALIGHT EDM

$582.04

View
COMP Cams Plastic Lifter Case

COMP Cams Plastic Lifter Case

$14.84

View
COMP Cams Lifter, Performance Series, Solid Flat Tappet, Lightweight, EDM V8 w/ .875 in. Diameter, Set of 16

COMP Cams Lifter, Performance Series, Solid Flat Tappet, Lightweight, EDM V8 w/ .875 in. Diameter, Set of 16

$1,086.44

View
COMP Cams Lifters, Mechanical Flat Tappet, Flat For Ford 239 and 255 Flathead., Set of 16

COMP Cams Lifters, Mechanical Flat Tappet, Flat For Ford 239 and 255 Flathead., Set of 16

$865.10

View
CROWCAMS Lifter Solid, Positive EDM, GM For Chevrolet/For Holden, .840 in. Body Dia., Flat Tappet, 400 Max. Pressure, Set of 13

CROWCAMS Lifter Solid, Positive EDM, GM For Chevrolet/For Holden, .840 in. Body Dia., Flat Tappet, 400 Max. Pressure, Set of 13

$558.03

View