Solid flat tappet lifters
Available in a set of 12 or 16

Set of 12 to suit Ford 6cyl Crossflow solid camshafts
Set of 16 to suit Ford Cleveland and Windsor solid camshafts

Important Lifter Preparation Notes:
Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

COMP Cams Lifters, Mechanical Flat Tappet, Flat For Ford 239 and 255 Flathead., Set of 16

COMP Cams Lifters, Mechanical Flat Tappet, Flat For Ford 239 and 255 Flathead., Set of 16

$865.10

View
Crow Cams GM SOLID LIFTERS 6 CYL SET

Crow Cams GM SOLID LIFTERS 6 CYL SET

$120.18

View
CROWCAMS Lifter Solid, Positive EDM, For Ford Falcon Xflow 6, Cleveland, Windsor V8 & 429-460, .872 in. Body Dia., Flat Tappet, 400 Max. Pressur

CROWCAMS Lifter Solid, Positive EDM, For Ford Falcon Xflow 6, Cleveland, Windsor V8 & 429-460, .872 in. Body Dia., Flat Tappet, 400 Max. Pressur

$428.26

View
COMP Cams Lifters, Mechanical Flat Tappet, For Ford 221-351W and 240-300 6 Cylinder., Set of 16

COMP Cams Lifters, Mechanical Flat Tappet, For Ford 221-351W and 240-300 6 Cylinder., Set of 16

$340.61

View