This clutch kit is designed to replace the Original Equipment (OE) unit including the OE flywheel. This kit includes a dual mass replacement flywheel which converts the clutch system to a solid mass flywheel (SMF). Changing from a dual mass flywheel (DMF) to a solid flywheel (SMF) increases the reliability of your clutch system and allows the flywheel to be machined for longer life. However you might experience slightly more noise or vibration compared to a DMF clutch system. Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE)). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing, Solid Mass Flywheel (SMF)

Features and Specifications
  • Heavy Duty Cover Assembly
  • Includes Solid Mass Flywheel
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 534Nm, Rated: 427Nm
  • Solid Flywheel: Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120

  • Fitment:
  • Nissan Patrol 1997-2000, 2.8 Ltr ICTD, RD28ETi GU, 12/97-4/0
  • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.0 mm, For Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V40, 1/82-12/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.0 mm, For Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V40, 1/82-12/84, Kit

    $202.15

    View
    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 21T x 29.8 mm, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 21T x 29.8 mm, Kit

    $645.73

    View
    PHC Clutch Clutch Kit, PHC Standard, 303 mm x 10T x 32.0 mm, For Ford F Series 1998-2003, 4.2 Ltr Diesel, 6.07 TCA F250, 10/98-6/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 303 mm x 10T x 32.0 mm, For Ford F Series 1998-2003, 4.2 Ltr Diesel, 6.07 TCA F250, 10/98-6/03, Kit

    $865.89

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 19.8 mm, For Renault Megane 2007-on, 2.0 Ltr MPFI, F4R 770, 99KW 6 Speed, 7/07-, New Zealand Model

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 19.8 mm, For Renault Megane 2007-on, 2.0 Ltr MPFI, F4R 770, 99KW 6 Speed, 7/07-, New Zealand Model

    $1,763.80

    View
    PHC Clutch Clutch Kit, PHC Standard, 354 mm x 14T x 35.0 mm, For Mitsubishi Fuso FM 1985-1989, 6.6 Ltr, 6D14 FM515F, 4/85-12/89, Kit

    PHC Clutch Clutch Kit, PHC Standard, 354 mm x 14T x 35.0 mm, For Mitsubishi Fuso FM 1985-1989, 6.6 Ltr, 6D14 FM515F, 4/85-12/89, Kit

    $650.83

    View
    PHC Clutch Clutch Kit, PHC Standard, 230 mm x 17T x 23.7 mm, For Chrysler PT Cruiser 2004-2008, 2.4 Ltr, EDZ, 105kw 12/04-5/08, Kit

    PHC Clutch Clutch Kit, PHC Standard, 230 mm x 17T x 23.7 mm, For Chrysler PT Cruiser 2004-2008, 2.4 Ltr, EDZ, 105kw 12/04-5/08, Kit

    $287.66

    View