Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: 0.5
  • Torque Capacity: Peak: 413Nm, Rated: 331Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT180

    • Fitment:
  • Daihatsu Delta 1978-1984, 2.0 Ltr Petrol, 5R V30, 1/78-12/84
  • Daihatsu Delta 1978-1984, 2.0 Ltr Petrol, 5R V31, 1/78-12/84
  • Daihatsu Delta 1978-1984, 2.0 Ltr Petrol, 5R V32, 1/78-12/84
  • Daihatsu Delta 1978-1984, 2.0 Ltr Petrol, 5R V34, 1/78-12/84
  • Daihatsu Delta 1978-1984, 2.0 Ltr Petrol, 5R V35, 1/78-12/84
  • Daihatsu Delta 1985-1988, 2.0 Ltr Petrol, 3Y V67, 1/85-12/88
  • Daihatsu Delta 1985-1988, 2.0 Ltr Petrol, 3Y V68, 1/85-12/88
  • Daihatsu Delta 1987-1988, 2.3 Ltr Petrol V107, 10/87-12/88
  • Daihatsu Delta 1987-1988, 2.3 Ltr Petrol V108, 10/87-12/88
  • Daihatsu Rocky 1984-1989, 2.0 Ltr, 3Y F80, 1/84-12/89
  • Daihatsu Rocky 1984-1989, 2.0 Ltr, 3Y F85, 1/84-12/89
  • Daihatsu Rocky 1984-1989, 2.0 Ltr, 3Y F87, 1/84-12/89
  • Toyota 4 Runner 1983-1985, 2.0 Ltr, 3Y YN60, 11/83-12/85
  • Toyota Coaster 1977-1980, 2.2 Ltr, 20R Bus, RB11, 8/77-7/8Toyota Coaster 1977-1991, 2.2 Ltr, 20R Bus, RB12, 1/77-12/91
  • Toyota Coaster 1980-1982, 2.4 Ltr, 22R Bus, RB13, 8/80-3/82
  • Toyota Coaster 1982-1992, 2.4 Ltr, 22R Bus, RB20, 5/82-4/92
  • Toyota Cressida 1981-1984, 2.8 Ltr, 5M MX62, 5 Speed, 2/81-12/84
  • Toyota Cressida 1985-1988, 2.8 Ltr, 5M-GE MX73, 5 Speed, 11/85-12/88
  • Toyota Dyna 1972-1977, 2.0 Ltr, 5R RU15, 1/72-8/77, some
  • Toyota Dyna 1978-1984, 2.0 Ltr, 5R RU20, 1/78-12/84
  • Toyota Dyna 1977-1984, 2.0 Ltr, 5R RU30, 1/77-12/84
  • Toyota Dyna 1984-1986, 2.0 Ltr, 3Y YU60, 9/84-12/86
  • Toyota Dyna 1984-1987, 2.2 Ltr, 4Y YU60-200, 11/84-1/87
  • Toyota Hiace 1982-1986, 2.0 Ltr, 3Y YH51, 12/82-12/86
  • Toyota Hiace 1983-1988, 2.0 Ltr, 3Y YH61, 1/83-8/88
  • Toyota Hiace 1983-1988, 2.0 Ltr, 3Y YH71, 1/83-8/88
  • Toyota Hilux 1983-1985, 2.2 Ltr Diesel, L LN55, 11/83-8/85, some models
  • Toyota Hilux 1983-1988, 2.0 Ltr, 3Y YN57, 11/83-8/88
  • Toyota Hilux 1986-1988, 2.2 Ltr, 4Y YN62, 8/86-7/88
  • Toyota Hilux 1983-1985, 2.0 Ltr, 3Y YN65, 11/83-12/85
  • Toyota Hilux 1986-1988, 2.2 Ltr, 4Y YN67, 8/86-7/88
  • Toyota Soarer 1982-1985, 2.8 Ltr, 5M-G MZ11, 3/82-12/85
  • Toyota Soarer 1985-1985, 3.0 Ltr, 6M-G MZ12, 1/85-12/85
  • Toyota Supra 1983-1986, 2.8 Ltr, 5M MA61, 1/83-12/86
  • Toyota Supra 1986-1988, 3.0 Ltr DOHC, 7M-GE MA70, 3/86-7/88
  • Toyota Chaser 1980-1983, 2.0 Ltr, MT-E MX51R, 1/80-12/83

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1969-on, 253ci & 308ci, V8 push type fork, Celica G/Box,

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1969-on, 253ci & 308ci, V8 push type fork, Celica G/Box,

    $532.43

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, For Volvo F7 1978-on, <2162, TD70 F7, R52, 1/78-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, For Volvo F7 1978-on, <2162, TD70 F7, R52, 1/78-, Kit

    $2,426.29

    PHC Clutch Clutch Kit, PHC Standard, 310 mm x 10T x 38.3 mm, Iveco Eurocargo 1998-2002, 5.9 Ltr TDI, 8060.25, 134kw ML100 E18, 6 Speed, 12/98-3/02, Ki

    PHC Clutch Clutch Kit, PHC Standard, 310 mm x 10T x 38.3 mm, Iveco Eurocargo 1998-2002, 5.9 Ltr TDI, 8060.25, 134kw ML100 E18, 6 Speed, 12/98-3/02, Ki

    $709.60

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 280 mm x 10T x 27.5 mm, For Holden With Conversion G/Box 1968-on, 350ci, V8 push type fork, For Ford G

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 280 mm x 10T x 27.5 mm, For Holden With Conversion G/Box 1968-on, 350ci, V8 push type fork, For Ford G

    $543.45

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 22.1 mm, Volkswagen Tiguan 2008-2010, 2.0 Ltr TDI, CBAB, 103kw 9/08-10/10, Suits LUK F/W, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 22.1 mm, Volkswagen Tiguan 2008-2010, 2.0 Ltr TDI, CBAB, 103kw 9/08-10/10, Suits LUK F/W, Kit

    $1,849.07

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 21T x 29.8 mm, For Toyota Prado 3.0 Ltr TDI, 1KD-FTV, 127kw KDJ120, 6 Speed,

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 21T x 29.8 mm, For Toyota Prado 3.0 Ltr TDI, 1KD-FTV, 127kw KDJ120, 6 Speed,

    $694.58