Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: -21
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot:
  • Alignment Tool: CAT166

    • Fitment:
  • Volkswagen Beetle 1971-1976, 1.6 Ltr 1302L, 1/71-12/76
  • Volkswagen Beetle 1971-1976, 1.6 Ltr 1302S, 1/71-12/76
  • Volkswagen Beetle 1971-1976, 1.6 Ltr 1303S, 1/71-12/76
  • Volkswagen Beetle 1970-1973, 1.6 Ltr 1600, 1/70-12/73, without RLP
  • Volkswagen Beetle 1971-1976, 1.6 Ltr 1600 S, 1/71-12/76
  • Volkswagen Kombi 1970-1975, 1.6 Ltr 1/70-12/75
  • Volkswagen Squareback 1970-1973, 1.6 Ltr 8/70-12/73

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.0 mm, For Hino 500 Series 2007-2011, 7.7 Ltr TDI, J08E, 152KW GT8J, 1/07-12/11, Check Size, Kit

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.0 mm, For Hino 500 Series 2007-2011, 7.7 Ltr TDI, J08E, 152KW GT8J, 1/07-12/11, Check Size, Kit

    $740.60

    View
    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.5 mm, For Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 208kw R32, 8/89-2/93, GTR 1989-1993,

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.5 mm, For Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 208kw R32, 8/89-2/93, GTR 1989-1993,

    $510.41

    View
    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 24T x 20.5 mm, Volkswagen Beetle 1970-1975, 1.3 Ltr 1300, 8/70-7/75, Kit

    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 24T x 20.5 mm, Volkswagen Beetle 1970-1975, 1.3 Ltr 1300, 8/70-7/75, Kit

    $185.33

    View
    Hays Clutch Fork Pivot Ball, Fixed, Steel, Natural, 88-95 GM Truck, Each

    Hays Clutch Fork Pivot Ball, Fixed, Steel, Natural, 88-95 GM Truck, Each

    $37.98

    View
    PHC Clutch Clutch Kit, PHC Standard, 170 mm x 18T x 19.3 mm, For Suzuki Hatch - Alto Hatch 1996-1999, 993cc 8V SOHC, G10 3/96-4/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 170 mm x 18T x 19.3 mm, For Suzuki Hatch - Alto Hatch 1996-1999, 993cc 8V SOHC, G10 3/96-4/99, Kit

    $96.72

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.3 Ltr Diesel, OM 601.970, 72kw 110D, 3/97-7/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.3 Ltr Diesel, OM 601.970, 72kw 110D, 3/97-7/03, Kit

    $357.50

    View