Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: -43
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB510
  • Alignment Tool: CAT121

    • Fitment:
  • Isuzu FSR 11 (450) Series 1986-1989, 5.8 Ltr TDI, 6BD1-T FSR11, 9/86-12/89
  • Isuzu FSR 11 (450) Series 1986-1989, 5.8 Ltr, 6BD1 FSR11, with option WF6, 9/86-12/89
  • Isuzu FSR 11 (450) Series 1986-1989, 5.8 Ltr TDI, 6ED1-T FSR11, 1/86-12/89
  • Isuzu FSR 12 (500-650) Series 1989-1992, 6.5 Ltr TDI, 6BG1-T FSR12, 1/89-12/92
  • Isuzu FSR 12 (500-650) Series 1989-1992, 6.5 Ltr, 6BG1 FSR12, with option WF6, 1/89-12/92
  • Isuzu FSR 32 (500-550-650-750) Series 1992-1998, 7.1 Ltr, 6HE1 FSR32, with option WF6, 1/92-12/98
  • Isuzu FSS 12 (500) Series 1989-1992, 6.5 Ltr, 6BG1 FSS12, 1/89-12/92
  • Isuzu FTR 11 Series 1986-1989, 5.8 Ltr TDI, 6BD1-T FTR11, 1/86-12/89
  • Isuzu FTR 11 Series 1986-1989, 5.8 Ltr, 6BD1 FTR11, with option WF6, 1/86-12/89
  • Isuzu FTR 12 (700-800) Series 1986-1989, 6.5 Ltr, 6BG1 FTR12, with option WF6, 1/86-12/89
  • Isuzu FTR 32 Series 1992-1998, 7.1 Ltr, 6HE1 FTR32, with option WF6, 1/92-12/98
  • Isuzu FTS 12 (500-700) Series 1987-1996, 6.5 Ltr, 6BG1 FTS12, with option WF6, 1/87-12/96
  • Isuzu FVR 11 Series 1985-1987, 6.5 Ltr, 6BD1 FVR11T, 5 Speed, 1/85-12/87
  • Isuzu FVR 12 Series 1985-1987, 6.5 Ltr, 6BG1 FVR12N, 1/85-12/87
  • Isuzu FVR 13 (900) Series 1992-1996, 8.4 Ltr, 6SA1 FVR13, with option WF6, 1/92-12/96
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR360, 1/81-12/85
  • Isuzu JCR Series 1985-1987, 6.5 Ltr, 6BG1 JCR360, 1/85-12/87
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR420, 1/81-12/85
  • Isuzu JCR Series 1985-1987, 6.5 Ltr, 6BG1 JCR420, 1/85-12/87
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR460, 1/81-12/85
  • Isuzu JCR Series 1985-1987, 6.5 Ltr, 6BG1 JCR500, 1/85-12/87
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR500, 1/81-12/85
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR550, 1/81-12/85
  • Isuzu JCR Series 1981-1985, 5.8 Ltr TDI, 6BD1-T JCR650, 1/81-12/85
  • Isuzu LR Series Bus 1960-on,, 6BD1 LR570, -
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR320, 1/82-12/86
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR370, 1/82-12/86
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR420, 1/82-12/86
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR450, 1/82-12/86
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR480, 1/82-12/86
  • Isuzu SCR Series 1982-1986, 5.8 Ltr TDI, 6BD1-T SCR550, 1/82-12/86
  • Isuzu T Series 1981-1984, 5.8 Ltr, 6BD1 TSD45, 5/81-12/84
  • Isuzu T Series 1977-1984, 5.8 Ltr, 6BD1 TWD26, 9/77-12/84

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 22T x 25.0 mm, For Volvo 940 Series 1990-1992, 2.3 Ltr DOHC, B234F 9/90-8/92, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 22T x 25.0 mm, For Volvo 940 Series 1990-1992, 2.3 Ltr DOHC, B234F 9/90-8/92, Kit

    $64.31

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.2 mm, For Subaru 2.0 Ltr ICT, 6 Speed, 12/01- 2001, Kit

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.2 mm, For Subaru 2.0 Ltr ICT, 6 Speed, 12/01- 2001, Kit

    $396.43

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 50.8 mm, For Volvo F12 1977-on, TD121F F12, R70, 1/77-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 50.8 mm, For Volvo F12 1977-on, TD121F F12, R70, 1/77-, Kit

    $2,648.85

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 32.0 mm, International AA Series 1959-1961, 110, 1/59-12/61, 3 Lever Cover, Kit

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 32.0 mm, International AA Series 1959-1961, 110, 1/59-12/61, 3 Lever Cover, Kit

    $942.15

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Holden Vectra 1996-1999, 2.0 Ltr EFI, X20XEV VE20A, F23, 1/96-12/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Holden Vectra 1996-1999, 2.0 Ltr EFI, X20XEV VE20A, F23, 1/96-12/99, Kit

    $549.68

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1977-on, 253ci & 308ci, V8 pull type fork, Celica G/Box,

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1977-on, 253ci & 308ci, V8 pull type fork, Celica G/Box,

    $610.12