Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB588
  • Alignment Tool: CAT150

    • Fitment:
  • Land Rover 109 1982-1984, 3.5 Ltr, V8 Series III 4WD, 5 Speed, 1/82-12/84
  • Land Rover 110 Series 1982-1984, 3.5 Ltr, V8 Series III 4WD, 5 Speed, 1/82-12/84
  • Land Rover Defender 1991-1993, 3.5 Ltr EFI, 22D 4WD, 5 Speed, 1/91-12/93
  • Land Rover Discovery 1991-1993, 3.5 Ltr EFI, 22D 4WD, 5 Speed, 1/91-12/93
  • Range Rover 1982-1993, 3.5 Ltr, V8 4WD, 5 Speed, 4/82-12/93

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 21T x 24.3 mm, For Nissan Dualis 2007-on, 2.0 Ltr MPFI, MR20DE, 103kw J10 AWD, 6 Speed, 12/07-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 21T x 24.3 mm, For Nissan Dualis 2007-on, 2.0 Ltr MPFI, MR20DE, 103kw J10 AWD, 6 Speed, 12/07-, Kit

    $557.37

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 20.0 mm, For Ford Focus 2011-2015, 2.0 Ltr MPFI, MGDA, 125kw LW, 5 Speed, 7/11-7/15, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 20.0 mm, For Ford Focus 2011-2015, 2.0 Ltr MPFI, MGDA, 125kw LW, 5 Speed, 7/11-7/15, Kit

    $495.62

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 275 mm x 10T x 29.0 mm, Asia Combi Van & Bus 1993-2000, 4.1 Ltr Diesel, VM Mini Bus, 1/93-12/00, press

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 275 mm x 10T x 29.0 mm, Asia Combi Van & Bus 1993-2000, 4.1 Ltr Diesel, VM Mini Bus, 1/93-12/00, press

    $541.03

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 20T x 22.6 mm, For Volvo C30 2006-on, 2.5 Ltr MPFI Turbo, B5254T7, 169kw T5, 10/06-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 20T x 22.6 mm, For Volvo C30 2006-on, 2.5 Ltr MPFI Turbo, B5254T7, 169kw T5, 10/06-, Kit

    $1,133.35

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 35.0 mm, For BMW X5 2004-2007, 3.0 Ltr CDI Turbo, M57N306D4, 16KW E53, 6 Speed, 9/04-8/07, LH, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 35.0 mm, For BMW X5 2004-2007, 3.0 Ltr CDI Turbo, M57N306D4, 16KW E53, 6 Speed, 9/04-8/07, LH, Kit

    $1,914.51

    View
    PHC Clutch Clutch Kit, PHC Standard, 187 mm x 17T x 19.0 mm, For Fiat 128 1974-1985, 1.1 Ltr, 128A.000 128, 4/74-12/85, Kit

    PHC Clutch Clutch Kit, PHC Standard, 187 mm x 17T x 19.0 mm, For Fiat 128 1974-1985, 1.1 Ltr, 128A.000 128, 4/74-12/85, Kit

    $216.71

    View