Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB509
  • Alignment Tool: CAT129

    • Fitment:
  • Hyundai Excel 1990-1994, 1.5 Ltr 8V EFI, G4DJ X2, 1/90-9/94
  • Hyundai S Coupe 1990-1996, 1.5 Ltr, G4EK 7/90-5/96
  • Hyundai S Coupe 1990-1992, 1.5 Ltr, G4DJ 7/90-10/92
  • Mitsubishi Cordia 1984-1985, 1.8 Ltr AB, 11/84-12/85
  • Mitsubishi Cordia 1986-1989, 1.8 Ltr AC, 1/86-7/89
  • Mitsubishi Lancer 1989-1990, 1.5 Ltr EFI, 4G15 CA, 4/89-8/9Mitsubishi Lancer 1990-1992, 1.6 Ltr EFI, 4G61 CB, 9/90-9/92
  • Mitsubishi Lancer 1990-1992, 1.5 Ltr EFI, 4G15 CB, 9/90-9/92
  • Mitsubishi Lancer 1993-1997, 2.0 Ltr Diesel, 4D68 CB3A, 1/93-12/97
  • Mitsubishi Lancer 1992-1995, 1.6 Ltr SOHC EFI, 4G92 CC, 9/92-3/95
  • Mitsubishi Lancer 1996-2004, 1.5 Ltr MPFI, 4G15, 69kw CE, 5 Speed, 7/96-7/04
  • Mitsubishi Lancer 1995-1999, 1.5 Ltr DOHC, 4G15 CJ2A, 1/95-12/99
  • Mitsubishi Lancer 1995-1999, 1.6 Ltr DOHC, 4G92 CJ4A, 1/95-12/99
  • Mitsubishi Lancer 1995-1999, 1.5 Ltr DOHC, 4G15 CK2A, 1/95-12/99
  • Mitsubishi Lancer 1995-1999, 1.6 Ltr DOHC, 4G92 CK4A, 1/95-12/99
  • Mitsubishi Lancer 2001-2010, 1.5 Ltr, 4G15, 67kw CS2A, 5/01-12/10, New Zealand Model
  • Mitsubishi Mirage 1996-2004, 1.5 Ltr, 4G15, 69kw CE, 5 Speed, 7/96-8/04
  • Mitsubishi Nimbus 1984-1985, 1.8 Ltr, 4G37 UA, 5/84-12/85
  • Mitsubishi Nimbus 1985-1987, 1.8 Ltr, 4G37 UB, 12/85-8/87
  • Proton Persona 1999-2000, 1.6 Ltr SOHC, 4G92 9/99-11/0Proton Persona 2008-2014, 1.6Ltr, S4PH, 82kw 3/08-11/14
  • Proton Satria 1995-2005, 1.5 Ltr, 4G15M, 64kw 5 Speed, 10/95-1/05, 200mm Diameter
  • Proton Satria 2007-2012, 1.6 Ltr, S4PH, 82kw BS, 12/07-8/12
  • Proton Satria 1999-2001, 1.6 Ltr, 4G92, 83kw XLI, 8/99-2/01
  • Proton Wira 2000-on, 1.5 Ltr, 4G15M Gli, 7/00-
  • Proton Wira 2000-on, 1.6 Ltr, 4G92 Xli, 7/00-

    • More From This Category

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    $162.30

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    $299.76

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    $116.58

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    $277.34

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    $269.58

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    $1,450.00