Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB509
  • Alignment Tool: CAT140

    • Fitment:
  • Mitsubishi Lancer 1997-1998, 2.0 Ltr Turbo, 4G63 CN9A (EVO IV), 8/97-8/98
  • Mitsubishi Lancer 1998-1998, 2.0 Ltr Turbo, 4G63T CP9A (EVO V), 1/98-12/98
  • Mitsubishi Lancer 1999-2001, 2.0 Ltr Turbo CP9A (EVO VI), 1/99-11/01

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, Eunos Eunos 30X 1993-1998, 1.8 Ltr V6, K8 EC1082, 11/93-12/98, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, Eunos Eunos 30X 1993-1998, 1.8 Ltr V6, K8 EC1082, 11/93-12/98, Kit

    $199.23

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 10T x 25.8 mm, For Chevrolet Luv 1972-1972, 1.6 Ltr 4 Cyl KB20, 3/72-12/72, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 10T x 25.8 mm, For Chevrolet Luv 1972-1972, 1.6 Ltr 4 Cyl KB20, 3/72-12/72, Kit

    $185.33

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.1 mm, For Holden Captiva 2011-2012, 2.4 Ltr, LE5, 123kw CG, 6 Speed, 1/11-5/12, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.1 mm, For Holden Captiva 2011-2012, 2.4 Ltr, LE5, 123kw CG, 6 Speed, 1/11-5/12, Kit

    $931.13

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 240 mm x 24T x 25.5 mm, For Nissan 180SX 1992-1998, 2.0 Ltr Turbo, SR20DT 12/92-12/98, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 240 mm x 24T x 25.5 mm, For Nissan 180SX 1992-1998, 2.0 Ltr Turbo, SR20DT 12/92-12/98, Kit

    $245.31

    View
    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, Iveco Eurocargo 2002-2003, 5.9 Ltr TDI, Tector 6 F4A, 176kw ML120 E24, 6 Speed, 1/02-5/03

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, Iveco Eurocargo 2002-2003, 5.9 Ltr TDI, Tector 6 F4A, 176kw ML120 E24, 6 Speed, 1/02-5/03

    $2,532.50

    View
    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Corvette 6.2 Ltr, LT1, 339kw C7, 6 Speed, 1/14- 2014, Kit

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Corvette 6.2 Ltr, LT1, 339kw C7, 6 Speed, 1/14- 2014, Kit

    $2,058.60

    View