Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: 0.5
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB506
  • Alignment Tool: CAT152

    • Fitment:
  • Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID
  • Ford Spectron 1979-1984, 1.6 Ltr SG, 1/79-12/84, 35mm Bearing ID

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 10T x 28.0 mm, For Toyota FA Series 1963-1975, 3.9 Ltr Petrol, F FA60, 1/63-12/75, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 10T x 28.0 mm, For Toyota FA Series 1963-1975, 3.9 Ltr Petrol, F FA60, 1/63-12/75, Kit

    $98.34

    View
    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 23T x 26.0 mm, For Mitsubishi Sigma 1980-1982, 2.6 Ltr GH, B/W 5 Speed, 5/80-3/82, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 23T x 26.0 mm, For Mitsubishi Sigma 1980-1982, 2.6 Ltr GH, B/W 5 Speed, 5/80-3/82, Kit

    $241.48

    View
    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    $367.30

    View
    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 24T x 25.5 mm, For Ford Corsair 1989-1992, 2.4 Ltr, KA24 UA, 11/89-12/92, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 24T x 25.5 mm, For Ford Corsair 1989-1992, 2.4 Ltr, KA24 UA, 11/89-12/92, Kit

    $164.41

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 230 mm x 23T x 26.1 mm, For Mitsubishi Lancer 1997-1998, 2.0 Ltr Turbo, 4G63 CN9A (EVO IV), 8/97-8/98,

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 230 mm x 23T x 26.1 mm, For Mitsubishi Lancer 1997-1998, 2.0 Ltr Turbo, 4G63 CN9A (EVO IV), 8/97-8/98,

    $394.17

    View
    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 26T x 28.7 mm, For Mercedes Benz Sprinter 1998-2000, 2.3 Ltr Diesel, OM601D23, 58kw 308D, 5 Speed, 1/98-

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 26T x 28.7 mm, For Mercedes Benz Sprinter 1998-2000, 2.3 Ltr Diesel, OM601D23, 58kw 308D, 5 Speed, 1/98-

    $970.41

    View