Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 456Nm, Rated: 365Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT207

    • Fitment:
  • Subaru Impreza 2003-2005, 1.6 Ltr, EJ16 GD5, 1/03-12/05, New Zealand Only
  • Subaru Impreza 2000-2007, 1.5 Ltr, EJ15 GG3, 8/00-6/07, New Zealand Only
  • Subaru Impreza 2007-on, 1.5 Ltr, EL15 GH2, 6/07-, New Zealand Only
  • Subaru Impreza 2007-on, 1.5 Ltr, EL15 GH3, 6/07-, New Zealand Only
  • Subaru Forester 2002-2005, 2.0 Ltr SOHC, EJ20J S11, 7/02-5/05
  • Subaru Forester 2002-2002, 2.0 Ltr SOHC, EJ20J S11, 2/02-7/02
  • Subaru Forester 2007-on, 2.0 Ltr DOHC, EJ20J S12, 5 Speed, 12/07-
  • Subaru Impreza 2005-2007, 2.0 Ltr DOHC, EJ20R 5 Speed, 6/05-6/07
  • Subaru Impreza 2005-2007, 2.0 Ltr SOHC, EJ20I 5 Speed, 6/05-6/07
  • Subaru Impreza 2007-on, 2.0 Ltr DOHC, EJ20R 5 Speed, 6/07-
  • Subaru Liberty 2000-2001, 2.0 Ltr SOHC, EJ20 B12 GL, 4/00-4/01
  • Subaru Outback 2000-2001, 2.0 Ltr SOHC, EJ20 B12 GL, 4/00-4/01
  • Subaru Forester 1998-2002, 2.0 Ltr SOHC, EJ20J S10, 3/98-5/02
  • Subaru Forester 1997-1998, 2.0 Ltr SOHC, EJ20J S10, 1/97-7/98
  • Subaru Impreza 2001-2002, 2.5 Ltr SOHC, EJ251, 112kw 5 Speed, 10/01-4/02
  • Subaru Liberty 1998-2001, 2.5 Ltr SOHC, EJ25 B12 GX, 4/98-4/01
  • Subaru Outback 1998-2001, 2.5 Ltr SOHC, EJ25 B12 GX, 4/98-4/01

    • More From This Category

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 21T x 29.8 mm, For Toyota Hilux 2.4 Ltr CRD Turbo, 2GD-FTV, 110kw GUN125, 6 S

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 21T x 29.8 mm, For Toyota Hilux 2.4 Ltr CRD Turbo, 2GD-FTV, 110kw GUN125, 6 S

    $1,169.09

    View
    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 23T x 24.2 mm, For Audi A4 1997-2001, 1.8 Ltr Turbo, AJL, 132kw B5, 12/97-9/01, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 23T x 24.2 mm, For Audi A4 1997-2001, 1.8 Ltr Turbo, AJL, 132kw B5, 12/97-9/01, Kit

    $405.68

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.0 mm, For Saab 9-3 2002-on, 2.0 Ltr MPFI Turbo, B207R, 154kw 6 Speed, 9/02-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.0 mm, For Saab 9-3 2002-on, 2.0 Ltr MPFI Turbo, B207R, 154kw 6 Speed, 9/02-, Kit

    $986.93

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 21T x 24.3 mm, For Nissan X-Trail 2008-2015, 2.0 Tdi, M9R, 127kw T31, 6 Speed, 7/08-3/15, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 21T x 24.3 mm, For Nissan X-Trail 2008-2015, 2.0 Tdi, M9R, 127kw T31, 6 Speed, 7/08-3/15, Kit

    $916.64

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 21T x 24.0 mm, For Renault R15 1973-1976, R15, 1/73-5/76, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 21T x 24.0 mm, For Renault R15 1973-1976, R15, 1/73-5/76, Kit

    $353.76

    View
    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 10T x 28.0 mm, For Toyota Dyna 1988-1988, 4.0 Ltr, 1W WU70, 1/88-8/88, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 10T x 28.0 mm, For Toyota Dyna 1988-1988, 4.0 Ltr, 1W WU70, 1/88-8/88, Kit

    $319.68

    View