Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB506
  • Alignment Tool: CAT199

    • Fitment:
  • Daihatsu Delta 1978-1984, 3.0 Ltr V10, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr V11, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr V12, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr, B V13, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr, B V15, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr, B V17, 1/78-12/84
  • Daihatsu Delta 1978-1984, 3.0 Ltr, B V18, 1/78-12/84
  • Toyota Coaster 1978-1982, 3.2 Ltr Diesel, 2B Bus, BB10, 6/78-8/82
  • Toyota Dyna 1977-1984, 3.0 Ltr, B BU20, 8/77-9/84
  • Toyota Dyna 1977-1984, 3.0 Ltr, B BU25, 8/77-9/84

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 27.5 mm, For Ford Bronco 1981-1983, 5.8 Ltr, V8 4WD, 1/81-12/83, Kit

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 27.5 mm, For Ford Bronco 1981-1983, 5.8 Ltr, V8 4WD, 1/81-12/83, Kit

    $220.38

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 21T x 23.8 mm, For Toyota Corolla 1983-1985, 1.6 Ltr, 4A, 86kw AE71, 10/83-4/85, Jap Model, K

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 21T x 23.8 mm, For Toyota Corolla 1983-1985, 1.6 Ltr, 4A, 86kw AE71, 10/83-4/85, Jap Model, K

    $238.27

    View
    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 10T x 29.0 mm, For Mercedes Benz 220 1968-1977, 2.2 Ltr Diesel, OM615.912, 44kw W115, 1/68-1/77, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 10T x 29.0 mm, For Mercedes Benz 220 1968-1977, 2.2 Ltr Diesel, OM615.912, 44kw W115, 1/68-1/77, Kit

    $371.85

    View
    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 10T x 50.0 mm, For Hino Bus RV Series 1982-on, 16.7 Ltr, EF750 RV367, R/Ranger, 1/82-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 10T x 50.0 mm, For Hino Bus RV Series 1982-on, 16.7 Ltr, EF750 RV367, R/Ranger, 1/82-, Kit

    $579.80

    View
    Hays Throwout Bearing, Hydraulic Release Bearing Conversion, Bearing Assembly, Braided Steel Hose, Shims, For Ford, Kit

    Hays Throwout Bearing, Hydraulic Release Bearing Conversion, Bearing Assembly, Braided Steel Hose, Shims, For Ford, Kit

    $878.75

    View