Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot:
  • Alignment Tool: CAT129

    • Fitment:
  • Hyundai Lantra 1992-1995, 1.8 Ltr, G4CN 10/92-8/95
  • Hyundai S Coupe 1992-1996, 1.5 Ltr Turbo, G4EK 10/92-5/96
  • Hyundai Sonata 1989-1993, 2.0 Ltr, G63B Y1, 1/89-4/93
  • Hyundai Sonata 1994-2001, 2.0 Ltr Y2, 1/94-11/01
  • Mitsubishi Chariot 1991-1995, 1.8 Ltr, 4G93 N12W, 1/91-12/95
  • Mitsubishi Chariot 1991-1997, 2.0 Ltr, 4G63 N33W, 5/91-9/97, New Zealand Model
  • Mitsubishi Chariot 1991-1997, 2.0 Ltr Non Turbo, 4G63 N43W, 5/91-9/97, New Zealand Model
  • Mitsubishi Cordia 1983-1984, 1.8 Ltr Turbo AA, 4/83-11/84
  • Mitsubishi Cordia 1984-1985, 1.8 Ltr Turbo AB, 11/84-12/85
  • Mitsubishi Cordia 1986-1989, 1.8 Ltr Turbo AC, 1/86-7/89
  • Mitsubishi Galant 1996-2000, 1.8 Ltr, 4G93, 111KW 8/96-4/00, New Zealand Only
  • Mitsubishi Galant 1992-1994, 1.8 Ltr V6, 6A11, 100kw E53A, 5/92-9/94, New Zealand Only
  • Mitsubishi Galant 1989-1990, 2.0 Ltr, 4G63 HG, 5/89-8/9Mitsubishi Galant 1989-1990, 2.0 Ltr 16V EFI, 4G63 HG (GSR), 5/89-8/9Mitsubishi Galant 1990-1993, 2.0 Ltr, 4G63 HH, 9/90-3/93
  • Mitsubishi Galant 1990-1993, 2.0 Ltr 16V EFI, 4G63 HH (GSR), 9/90-3/93
  • Mitsubishi Galant 1993-1996, 2.0 Ltr, 4G63A HJ, 4/93-5/96
  • Mitsubishi Lancer 1992-1995, 1.8 Ltr EFI, 4G93 CC, 9/92-3/95
  • Mitsubishi Lancer 2003-2005, 2.0 Ltr SOHC, 4G94, 92kw CH, 5 Speed, 10/03-8/05
  • Mitsubishi Legnum 1995-2000, 1.8 Ltr, 4G93, 111KW 8/95-4/00, New Zealand Only
  • Mitsubishi Legnum 1996-2000, 1.8 Ltr, 4G93, 111kw EC1W, 12/96-4/00, New Zealand Model
  • Mitsubishi Libero 1992-2000, 1.8 Ltr Non Turbo, 4G93, 89kw CB5W, 5/92-3/00, New Zealand Model
  • Mitsubishi Libero 1992-2000, 1.8 Ltr Non Turbo, 4G93, 89kw CD5W, 5/92-3/00, New Zealand Model
  • Mitsubishi Magna 1985-1987, 2.6 Ltr, 4G54 TM, 4/85-5/87
  • Mitsubishi Nimbus 1987-1992, 2.0 Ltr, 4G63 UC, 9/87-1/92
  • Mitsubishi RVR 1991-1997, 1.8 Ltr, 4G93 N11W, 1/91-12/97
  • Mitsubishi RVR 1991-1997, 1.8 Ltr, 4G93 N21W, 1/91-12/97
  • Proton 1997-1998, 1.8 Ltr 16V MPFI, 4G93 Coupe, M21, 10/97-9/98
  • Proton Satria 1999-2005, 1.8 Ltr, 4G93, 103kw GTi, 8/99-12/05
  • Volvo S40-V40 1998-2004, 1.8 Ltr 16V, B4184SM, 92kw Gdi, 3/98-3/04
  • Volvo S40-V40 2001-2004, 1.8 Ltr 16V, B4184SJ, 90kw Gdi, 6/01-3/04

    • More From This Category

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    $162.30

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    $299.76

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    $116.58

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    $277.34

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    $269.58

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    $1,450.00