Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot:
  • Alignment Tool:

  • Fitment:
  • Toyota Landcruiser with Eng Conversion 1974-on, Holden V8 FJ40, 1/74-, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1974-on, Holden V8 FJ45, 1/74-, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1974-on, Holden V8 FJ55, 1/74-, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1981-1984, Holden V8 FJ60, 1/81-12/84, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1985-1988, Holden V8 FJ62, 1/85-12/88, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1985-1990, Holden V8 FJ70, 1/85-6/90, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1985-1990, Holden V8 FJ73, 1/85-6/90, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1985-1990, Holden V8 FJ75, 1/85-6/90, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1981-1988, Holden V8 HJ47, 1/81-12/88, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1981-1988, Holden V8 HJ60, 1/81-12/88, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1986-1987, Holden V8 HJ61, 1/86-8/87, Flat Dia Cover
  • Toyota Landcruiser with Eng Conversion 1981-1988, Holden V8 HJ75, 1/81-12/88, Flat Dia Cover
  • More From This Category

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 190 mm x 20T x 22.8 mm, For Ford Laser 1981-1983, 1.5 Ltr, E5 KA, 3/81-3/83, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 190 mm x 20T x 22.8 mm, For Ford Laser 1981-1983, 1.5 Ltr, E5 KA, 3/81-3/83, Kit

    $239.79

    View
    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 20T x 22.4 mm, For Hyundai i40 2011-on, 2.0 Ltr DOHC, G4NC, 130kw VF, 6 Speed, 9/11-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 20T x 22.4 mm, For Hyundai i40 2011-on, 2.0 Ltr DOHC, G4NC, 130kw VF, 6 Speed, 9/11-, Kit

    $923.38

    View
    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 40.0 mm, MAN 08 Series 1970-1972, 8.156H, 1/70-12/72, Kit

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 40.0 mm, MAN 08 Series 1970-1972, 8.156H, 1/70-12/72, Kit

    $539.55

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits LUK F

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits LUK F

    $1,439.19

    View
    Sonnax Heavy Duty Intermediate Overrun Clutch Outer Race, GM, Th350, Th350C, Each

    Sonnax Heavy Duty Intermediate Overrun Clutch Outer Race, GM, Th350, Th350C, Each

    $154.67

    View