Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 581Nm, Rated: 464Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB531
  • Alignment Tool: CAT180

    • Fitment:
  • Holden With Conversion G/Box 1964-on, 6 Cyl, Red Motor push type fork, Celica G/Box, 1/64-

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.0 mm, For Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V40, 1/82-12/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.0 mm, For Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V40, 1/82-12/84, Kit

    $288.77

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 21T x 29.0 mm, For Toyota 4 Runner 1983-1988, 2.4 Ltr Diesel, 2L LN60, 11/83-8/88, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 21T x 29.0 mm, For Toyota 4 Runner 1983-1988, 2.4 Ltr Diesel, 2L LN60, 11/83-8/88, Kit

    $181.47

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 18T x 20.5 mm, For Nissan Avenir 1993-1998, 1.8 Ltr, SR18DE, 93kw W10, 1/93-7/98, New Zealand

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 18T x 20.5 mm, For Nissan Avenir 1993-1998, 1.8 Ltr, SR18DE, 93kw W10, 1/93-7/98, New Zealand

    $261.57

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 250 mm x 23T x 26.1 mm, For Mitsubishi Delica 2.8 Ltr TDI, 4M40T, 102kw PD8W, 5 Speed,

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 250 mm x 23T x 26.1 mm, For Mitsubishi Delica 2.8 Ltr TDI, 4M40T, 102kw PD8W, 5 Speed,

    $747.33

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 35.0 mm, For BMW 645 2004-2010, 4.4 Ltr MPFI, N62 B44, 245kw 645Ci E63, 6 Speed, 8/04-12/1, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 35.0 mm, For BMW 645 2004-2010, 4.4 Ltr MPFI, N62 B44, 245kw 645Ci E63, 6 Speed, 8/04-12/1, Kit

    $2,766.43

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 28T x 22.1 mm, Volkswagen Multivan 2003-2009, 1.9 Ltr TDI, AXB, 77kw 5 Speed, 4/03-11/09, Suits Sachs F/

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 28T x 22.1 mm, Volkswagen Multivan 2003-2009, 1.9 Ltr TDI, AXB, 77kw 5 Speed, 4/03-11/09, Suits Sachs F/

    $389.83