Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: -15.5
  • Torque Capacity: Peak: 440Nm, Rated: 352Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB509
  • Alignment Tool: CAT129

    • Fitment:
  • Mitsubishi 3000GT 1990-1999, 3.0 Ltr, V6 6G72 2WD, 4/90-12/99
  • Mitsubishi Chariot 1995-1997, 2.0 Ltr Turbo, 4G63T N43W, 5/95-9/97, New Zealand Model
  • Mitsubishi Diamante 1990-1995, 3.0 Ltr, V6 6G72 F17A, 5/90-1/95
  • Mitsubishi Diamante 1995-2002, 2.5 Ltr, V6 6G73 F31A, 1/95-9/02
  • Mitsubishi FTO 1994-2000, 2.0 Ltr EFI, V6 6A12 DE3A, 9/94-12/0Mitsubishi Galant 1990-1993, 2.0 Ltr 16V Turbo, 4G63T HH (VR4), 9/90-3/93
  • Mitsubishi GTO 1990-1994, 3.0 Ltr Turbo, V6 6G72 Z16A, 1/90-12/94
  • Mitsubishi Lancer 1992-1995, 1.8 Ltr Turbo, 4G93T CC (GSR), 9/92-3/95
  • Mitsubishi Lancer 1995-1997, 2.0 Ltr Turbo, 4G63T CD (GSR), 4/95-5/97
  • Mitsubishi Lancer 1992-1993, 2.0 Ltr Turbo, 4G63 CD9A (EVO I), 10/92-4/93
  • Mitsubishi Lancer 1993-1993, 2.0 Ltr Turbo, 4G63 CD9A (EVO II), 5/93-11/93
  • Mitsubishi Lancer 1993-1997, 2.0 Ltr Turbo, 4G63 CE9A (EVO III), 12/93-7/97
  • Mitsubishi Legnum 1996-1998, 2.5 Ltr, 6A13, 130KW EC5W, 8/96-7/98
  • Mitsubishi Libero 1994-2000, 1.8 Ltr Turbo, 4G93T, 160kw CD5W, 1/94-3/00, New Zealand Model
  • Mitsubishi Magna 1991-1994, 3.0 Ltr V6, 6G72 TR, 4/91-3/94
  • Mitsubishi Magna 1994-1996, 3.0 Ltr V6, 6G72 TS, 4/94-12/96

    • More From This Category

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 254 mm x 23T x 26.2 mm, For Ford Ranger 2006-2009, 2.5 Ltr, 2.5 MZR-CD, 105kw PJ, 5 Speed, 11/06-3/09,

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 254 mm x 23T x 26.2 mm, For Ford Ranger 2006-2009, 2.5 Ltr, 2.5 MZR-CD, 105kw PJ, 5 Speed, 11/06-3/09,

    $930.04

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.1 mm, For Ford Mondeo 2003-2007, 2.0 Ltr TDCi, 96kw 6 Speed, 6/03-8/07, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.1 mm, For Ford Mondeo 2003-2007, 2.0 Ltr TDCi, 96kw 6 Speed, 6/03-8/07, Kit

    $1,307.24

    View
    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 18T x 20.8 mm, For Citroen Berlingo 2005-2011, 1.6 Ltr Hdi, DV6ETED, 55kw 7/05-12/11, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 18T x 20.8 mm, For Citroen Berlingo 2005-2011, 1.6 Ltr Hdi, DV6ETED, 55kw 7/05-12/11, Kit

    $638.55

    View
    Hays Pressure Plate, Diaphragm-Style, 10.5 in. Disc Diameter, For Ford, For Mercury, Each

    Hays Pressure Plate, Diaphragm-Style, 10.5 in. Disc Diameter, For Ford, For Mercury, Each

    $379.19

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 14T x 19.0 mm, For Holden Astra 1998-2005, 1.8 Ltr DOHC EFI, X18XEI, 90kw TS, 2/98-12/05, with Plastic C

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 14T x 19.0 mm, For Holden Astra 1998-2005, 1.8 Ltr DOHC EFI, X18XEI, 90kw TS, 2/98-12/05, with Plastic C

    $292.98

    View
    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, For Volvo F7 1978-on, <2162, TD70 F7, R52, 1/78-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, For Volvo F7 1978-on, <2162, TD70 F7, R52, 1/78-, Kit

    $1,933.41

    View