Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: -1.7
  • Torque Capacity: Peak: 368Nm, Rated: 295Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB509
  • Alignment Tool: CAT187

    • Fitment:
  • Honda Accord 1995-1997, 2.2 Ltr, F22B CD, 1/95-12/97, 254mm Bolt PCD
  • Honda Accord 1998-2003, 2.3 Ltr, F23Z2 CK2, 1/98-12/03, 254mm Bolt PCD
  • Honda Prelude 1991-1994, 2.2 Ltr, F22A BA8-100, 12/91-12/94, 254mm Bolt PCD
  • Honda Prelude 1991-1994, 2.2 Ltr, F22A BA8-110, 12/91-12/94, 254mm Bolt PCD
  • Honda Prelude 1991-1994, 2.2 Ltr, F22A BA9-100, 12/91-12/94, 254mm Bolt PCD
  • Honda Prelude 1991-1994, 2.2 Ltr, F22A BA9-110, 12/91-12/94, 254mm Bolt PCD
  • Honda Prelude 1991-1994, 2.3 Ltr DOHC, H23A BB, 12/91-12/94, 254mm Bolt PCD
  • Honda Prelude 1994-1996, 2.2 Ltr 16V SOHC, F22A S, 1/94-12/96, 254mm Bolt PCD
  • Honda Prelude 1994-1996, 2.3 Ltr 16V DOHC, H23A SI, 1/94-12/96, 254mm Bolt PCD
  • Honda Prelude 1994-1997, 2.2 Ltr 16V DOHC, H22A VTEC, 142kw VTI-R, 1/94-2/97, 254mm Bolt PCD

    • More From This Category

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 10T x 28.0 mm, For Toyota Dyna 4.0 Ltr, 1W WU70, 1/88-8/88 1988-1988, Kit

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 10T x 28.0 mm, For Toyota Dyna 4.0 Ltr, 1W WU70, 1/88-8/88 1988-1988, Kit

    $407.96

    PHC Clutch Clutch Kit, PHC Standard, 160 mm x 20T x 17.3 mm, For Renault R10 1970-1971, 1.1 Ltr, C1E R10S (R1190), 1/70-12/71, Kit

    PHC Clutch Clutch Kit, PHC Standard, 160 mm x 20T x 17.3 mm, For Renault R10 1970-1971, 1.1 Ltr, C1E R10S (R1190), 1/70-12/71, Kit

    $172.70

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 350 mm x 10T x 44.0 mm, For Hino FE Series 1992-1997, 7.4 Ltr, H07D FE3H Raven 800, LF06S 6 Speed, 1/9

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 350 mm x 10T x 44.0 mm, For Hino FE Series 1992-1997, 7.4 Ltr, H07D FE3H Raven 800, LF06S 6 Speed, 1/9

    $320.28

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 20T x 22.4 mm, For Hyundai Accent 2003-2006, 1.6 Ltr MPFI, G4EC2, 78kw 5 Speed, 3/03-4/06, Ki

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 20T x 22.4 mm, For Hyundai Accent 2003-2006, 1.6 Ltr MPFI, G4EC2, 78kw 5 Speed, 3/03-4/06, Ki

    $189.30

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 12T x 28.0 mm, For Ford Trader 1990-1996, 4.0 Ltr Diesel 0409, 1/90-12/96, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 12T x 28.0 mm, For Ford Trader 1990-1996, 4.0 Ltr Diesel 0409, 1/90-12/96, Kit

    $533.70

    PHC Clutch Clutch Kit, PHC Standard, 205 mm x 14T x 18.7 mm, For Holden Astra 2004-2006, 1.8 Ltr DOHC EFI, Z18XE, 92kw AH, 3/04-11/06, Kit

    PHC Clutch Clutch Kit, PHC Standard, 205 mm x 14T x 18.7 mm, For Holden Astra 2004-2006, 1.8 Ltr DOHC EFI, Z18XE, 92kw AH, 3/04-11/06, Kit

    $359.32