Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 456Nm, Rated: 365Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT207

    • Fitment:
  • Subaru Impreza 1999-2000, 1.5 Ltr, EJ15, 70KW GF1, 9/99-7/00, New Zealand Only
  • Subaru Impreza 1996-2000, 1.5 Ltr, EJ15 GF2, 9/96-7/00, New Zealand Only
  • Subaru Impreza 2000-2007, 1.5 Ltr, EJ15 GG2, 8/00-6/07, New Zealand Only
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20 BD5, 10/93-11/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 100KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 114KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20N, 92KW BG5, 10/93-5/98, New Zealand Model
  • Subaru Impreza 1993-1996, 1.8 Ltr, EJ18S, 76kw 4WD, 4/93-11/96
  • Subaru Impreza 1993-1997, 2.0 Ltr, EJ20 1/93-7/97
  • Subaru Impreza 1995-2000, 2.0 Ltr SOHC, EJ20 5 Speed, 10/95-4/0Subaru Impreza 2000-2005, 2.0 Ltr SOHC, EJ20, 92kw 5 Speed, 4/00-7/05
  • Subaru Impreza 1997-2000, 2.0 Ltr SOHC, EJ20E Sportswagon, 3/97-10/0Subaru Legacy 1993-1998, 2.0 Ltr, EJ20 BD5, 10/93-11/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 100KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 114KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20N, 92KW BG5, 10/93-5/98, New Zealand Model
  • Subaru Liberty 1989-1994, 2.2 Ltr, EJ22 2WD, 1/89-6/94
  • Subaru Liberty 1994-1998, 2.2 Ltr, EJ22, 98kw 4WD, 6/94-8/98
  • Subaru Liberty 1989-1994, 2.2 Ltr, EJ22 4WD, 10/89-6/94
  • Subaru Liberty 1998-2000, 2.0 Ltr SOHC, EJ20 B12 GL, 4/98-3/0Subaru Liberty 1998-1999, 2.0 Ltr SOHC, EJ20 B12 LX, 4/98-6/99
  • Subaru Outback 1989-1994, 2.2 Ltr, EJ22 2WD, 1/89-6/94
  • Subaru Outback 1994-1998, 2.2 Ltr, EJ22, 98kw 4WD, 6/94-8/98
  • Subaru Outback 1989-1994, 2.2 Ltr, EJ22 4WD, 10/89-6/94
  • Subaru Outback 1998-2000, 2.0 Ltr SOHC, EJ20 B12 GL, 4/98-3/0Subaru Outback 1998-1999, 2.0 Ltr SOHC, EJ20 B12 LX, 4/98-6/99

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 22T x 25.0 mm, For Volvo 940 Series 1990-1992, 2.3 Ltr DOHC, B234F 9/90-8/92, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 22T x 25.0 mm, For Volvo 940 Series 1990-1992, 2.3 Ltr DOHC, B234F 9/90-8/92, Kit

    $64.31

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.2 mm, For Subaru 2.0 Ltr ICT, 6 Speed, 12/01- 2001, Kit

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.2 mm, For Subaru 2.0 Ltr ICT, 6 Speed, 12/01- 2001, Kit

    $396.43

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 50.8 mm, For Volvo F12 1977-on, TD121F F12, R70, 1/77-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 50.8 mm, For Volvo F12 1977-on, TD121F F12, R70, 1/77-, Kit

    $2,648.85

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 32.0 mm, International AA Series 1959-1961, 110, 1/59-12/61, 3 Lever Cover, Kit

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 32.0 mm, International AA Series 1959-1961, 110, 1/59-12/61, 3 Lever Cover, Kit

    $942.15

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Holden Vectra 1996-1999, 2.0 Ltr EFI, X20XEV VE20A, F23, 1/96-12/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Holden Vectra 1996-1999, 2.0 Ltr EFI, X20XEV VE20A, F23, 1/96-12/99, Kit

    $549.68

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1977-on, 253ci & 308ci, V8 pull type fork, Celica G/Box,

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 21T x 29.0 mm, For Holden With Conversion G/Box 1977-on, 253ci & 308ci, V8 pull type fork, Celica G/Box,

    $610.12