Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 456Nm, Rated: 365Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT207

    • Fitment:
  • Subaru Impreza 1999-2000, 1.5 Ltr, EJ15, 70KW GF1, 9/99-7/00, New Zealand Only
  • Subaru Impreza 1996-2000, 1.5 Ltr, EJ15 GF2, 9/96-7/00, New Zealand Only
  • Subaru Impreza 2000-2007, 1.5 Ltr, EJ15 GG2, 8/00-6/07, New Zealand Only
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20 BD5, 10/93-11/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 100KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 114KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20N, 92KW BG5, 10/93-5/98, New Zealand Model
  • Subaru Impreza 1993-1996, 1.8 Ltr, EJ18S, 76kw 4WD, 4/93-11/96
  • Subaru Impreza 1993-1997, 2.0 Ltr, EJ20 1/93-7/97
  • Subaru Impreza 1995-2000, 2.0 Ltr SOHC, EJ20 5 Speed, 10/95-4/0Subaru Impreza 2000-2005, 2.0 Ltr SOHC, EJ20, 92kw 5 Speed, 4/00-7/05
  • Subaru Impreza 1997-2000, 2.0 Ltr SOHC, EJ20E Sportswagon, 3/97-10/0Subaru Legacy 1993-1998, 2.0 Ltr, EJ20 BD5, 10/93-11/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 100KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1996-1998, 2.0 Ltr, EJ20, 114KW BG5, 6/96-5/98, New Zealand Model
  • Subaru Legacy 1993-1998, 2.0 Ltr, EJ20N, 92KW BG5, 10/93-5/98, New Zealand Model
  • Subaru Liberty 1989-1994, 2.2 Ltr, EJ22 2WD, 1/89-6/94
  • Subaru Liberty 1994-1998, 2.2 Ltr, EJ22, 98kw 4WD, 6/94-8/98
  • Subaru Liberty 1989-1994, 2.2 Ltr, EJ22 4WD, 10/89-6/94
  • Subaru Liberty 1998-2000, 2.0 Ltr SOHC, EJ20 B12 GL, 4/98-3/0Subaru Liberty 1998-1999, 2.0 Ltr SOHC, EJ20 B12 LX, 4/98-6/99
  • Subaru Outback 1989-1994, 2.2 Ltr, EJ22 2WD, 1/89-6/94
  • Subaru Outback 1994-1998, 2.2 Ltr, EJ22, 98kw 4WD, 6/94-8/98
  • Subaru Outback 1989-1994, 2.2 Ltr, EJ22 4WD, 10/89-6/94
  • Subaru Outback 1998-2000, 2.0 Ltr SOHC, EJ20 B12 GL, 4/98-3/0Subaru Outback 1998-1999, 2.0 Ltr SOHC, EJ20 B12 LX, 4/98-6/99

    • More From This Category

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 24T x 25.5 mm, For Nissan Patrol 4.2 Ltr TDI, TD42 Turbo GQ, 1/88-12/98 1988-

    4Terrain Ultimate Clutch Kit, 4x4 Ultimate Offroad Performance, 275 mm x 24T x 25.5 mm, For Nissan Patrol 4.2 Ltr TDI, TD42 Turbo GQ, 1/88-12/98 1988-

    $621.21

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Daewoo Cielo 1995-1997, 1.5 Lt. DOHC, A15MF GLX, 10/95-4/97, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 20.4 mm, For Daewoo Cielo 1995-1997, 1.5 Lt. DOHC, A15MF GLX, 10/95-4/97, Kit

    $161.11

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.0 mm, For Hino FF Series 1982-1986, 6.7 Ltr, H07C FF177, 5 Speed, 1/82-12/86, Kit

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.0 mm, For Hino FF Series 1982-1986, 6.7 Ltr, H07C FF177, 5 Speed, 1/82-12/86, Kit

    $916.64

    Sonnax Smart-Tech® Overdrive Clutch Housing Kit, Chrysler, Smart-Tech® 68RFE, Each

    Sonnax Smart-Tech® Overdrive Clutch Housing Kit, Chrysler, Smart-Tech® 68RFE, Each

    $1,393.93

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 265 mm x 26T x 29.0 mm, For Chevrolet Corvette 1965-1967, 327ci, V8 C2, 1/65-12/67, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 265 mm x 26T x 29.0 mm, For Chevrolet Corvette 1965-1967, 327ci, V8 C2, 1/65-12/67, Kit

    $205.52

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 20T x 22.0 mm, For Mitsubishi L200 1978-1982, 1.6 Ltr, 4G32 MA, 6/78-9/82, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 20T x 22.0 mm, For Mitsubishi L200 1978-1982, 1.6 Ltr, 4G32 MA, 6/78-9/82, Kit

    $107.75