Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot:
  • Alignment Tool: CAT119

    • Fitment:
  • Nissan Avenir 1993-1998, 1.8 Ltr, SR18DE, 93kw W10, 1/93-7/98, New Zealand Model
  • Nissan Avenir 1998-2005, 1.8 Ltr, QB18DE, 93kw W11, 8/98-11/05, New Zealand Model
  • Nissan Bluebird 1989-1991, 1.8 Ltr, SR18DI, 82kw U12, 10/89-8/91, New Zealand Model
  • Nissan Bluebird 1996-1998, 1.8 Ltr DOHC, SR18DE U14, 5 Speed, 1/96-12/98
  • Nissan Pintara 1992-1993, 2.0 Ltr, CA20 U12, 1/92-12/93
  • Nissan Presea 1995-1999, 1.8 Ltr, SR18DE, 93kw PR11, 1/95-8/99, New Zealand Model
  • Nissan Primera 1990-1996, 2.0 Ltr DOHC, SR20DE HP10, 5 Speed, 2/90-12/96
  • Nissan Primera 1995-1998, 2.0 Ltr DOHC, SR20 HP11, 9/95-9/98
  • Nissan Primera 1990-1996, 1.8 Ltr, SR18 P10, 5 Speed, 2/90-12/96
  • Nissan Primera 1998-1999, 1.8 Ltr, SR18DE P11, 9/98-9/99
  • Nissan Primera 1995-1998, 1.8 Ltr, SR18 P11, 9/95-9/98
  • Nissan Primera 1999-2000, 1.8 Ltr, QD18DE QP11, 9/99-12/0Nissan Primera 1998-1999, 1.8 Ltr, SR18DE WP11, 9/98-9/99
  • Nissan Primera 1998-2000, 1.8 Ltr, QG18D WQP11, 8/98-12/0Nissan Pulsar 1990-1992, 1.8 Ltr, SR18DE, 104kw HN14, 8/90-7/92, New Zealand Model
  • Nissan Pulsar 1992-1995, 2.0 Ltr, SR20DE N14 Ti, 6/92-12/95
  • Nissan Pulsar 1995-2000, 1.8 Ltr, SR18DE, 104kw N15, 1/95-10/00, New Zealand Model
  • Nissan Pulsar 1995-2000, 2.0 Ltr, SR20DE N15, 10/95-7/0Nissan Pulsar 2000-2006, 1.8 Ltr DOHC, QG18DE, 90kw N16, 7/00-2/06
  • Nissan Wingroad 1999-2005, 1.8 Ltr, QG18DE, 89kw Y11, 5/99-10/05, New Zealand Model
  • Nissan AD 1990-1997, 1.5 Ltr, GA15DS, 70kw Y10 FWD, 10/90-5/97, New Zealand Model
  • Nissan AD 1997-1999, 1.5 Ltr, GA15DE, 78kw Y11 FWD, 5/97-5/99, New Zealand Model
  • Nissan AD 1990-1997, 1.7 Di, CD17, 70kw Y10 FWD, 10/90-5/97, New Zealand Model
  • Nissan AD 1999-2008, 1.8 Ltr, QG18DE, 90kw Y11 4WD, 6/99-12/08, New Zealand Model
  • Nissan Pulsar 1997-2000, 1.6 Ltr, SR16VE, 130kw N15, 5 Speed, 9/97-10/00

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 14T x 25.0 mm, For Saab 9-5 2001-2005, 2.3 Ltr Turbo, B235E, 136kw 1/01-8/05, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 14T x 25.0 mm, For Saab 9-5 2001-2005, 2.3 Ltr Turbo, B235E, 136kw 1/01-8/05, Kit

    $609.95

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 22T x 24.5 mm, For Ford Laser 1983-1985, 1.5 Ltr Turbo, E5T KB, 3/83-10/85, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 22T x 24.5 mm, For Ford Laser 1983-1985, 1.5 Ltr Turbo, E5T KB, 3/83-10/85, Kit

    $303.41

    View
    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 24T x 25.5 mm, For Nissan 350Z 3.5 Ltr, VQ35DE, 206kw 350Z, 2/03-3/07 2003-2007, Kit

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 24T x 25.5 mm, For Nissan 350Z 3.5 Ltr, VQ35DE, 206kw 350Z, 2/03-3/07 2003-2007, Kit

    $2,158.42

    View
    Hays Clutch Kit, Spring Hub, 26 Spline, 11 Disc Dia., 1-1/8 in. Input Shaft, 400 Horsepower, Organic, 1999-2004 For Ford Mustang, Kit

    Hays Clutch Kit, Spring Hub, 26 Spline, 11 Disc Dia., 1-1/8 in. Input Shaft, 400 Horsepower, Organic, 1999-2004 For Ford Mustang, Kit

    $866.07

    View
    PHC Clutch Clutch Kit, PHC Standard, 236 mm x 21T x 29.0 mm, For Toyota Caldina 1997-2002, 2.0 Ltr, 3SGTE, 193kw ST215, 9/97-8/02, Suits Cast Iron Clu

    PHC Clutch Clutch Kit, PHC Standard, 236 mm x 21T x 29.0 mm, For Toyota Caldina 1997-2002, 2.0 Ltr, 3SGTE, 193kw ST215, 9/97-8/02, Suits Cast Iron Clu

    $153.45

    View