Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 269Nm, Rated: 215Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot:
  • Alignment Tool: CAT119

    • Fitment:
  • Nissan AD 1995-1996, 1.5 Ltr, GA15DE, 78kw WFY10, 6/95-5/96, New Zealand Model
  • Nissan Bluebird 1991-1995, 1.6 Ltr, GA16DS, 72kw U13, 9/91-12/95, New Zealand Model
  • Nissan NX-NXR 1991-1995, 1.6 Ltr, GA16 B13, 5 Speed, 10/91-9/95
  • Nissan Presea 1995-1999, 1.5 Ltr, GA15DE, 78kw R11, 1/95-8/99, New Zealand Model
  • Nissan Pulsar 1992-1995, 1.6 Ltr, GA16DE N14, 2/92-12/95
  • Nissan Pulsar 1990-1992, 1.5 Ltr, GA15DS, 70kw N14, 8/90-7/92, New Zealand Model
  • Nissan Pulsar 1995-2000, 1.5 Ltr, GA15DE, 78kw N15, 1/95-12/00, New Zealand Model
  • Nissan Pulsar 1995-2000, 1.6 Ltr, GA16DE N15, 10/95-7/0Nissan Pulsar 1995-2000, 1.6 Ltr, GA16 N15, 1/95-7/0Nissan Sentra 1996-1999, 1.5 Ltr, GA15DE N15, 1/96-12/99, New Zealand Model
  • Nissan Sentra 1996-1998, 1.6 Ltr DOHC, GA16DE N16, 1/96-12/98
  • Nissan Sunny 1995-1996, 1.5 Ltr, GA15DE, 78kw WFY10, 6/95-4/96, New Zealand Model
  • Nissan Wingroad 1996-1999, 1.5 Ltr, GA15DE, 78kw WFY10, 5/96-4/99, New Zealand Model
  • Nissan AD 1990-1997, 1.3 Ltr, GA13DS, 58kw Y10, 10/90-5/97, New Zealand Model
  • Nissan AD 1997-1999, 1.3 Ltr, GA13DE Y10, 5/97-5/99, New Zealand Model
  • Nissan AD Van 1982-1990, 1.7 Di, GA13DE Y10, 10/82-9/90, New Zealand Model

    • More From This Category

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    Mantic Clutch Kit, Stage 5, Performance, 200 mm x 22T x 24.5 mm, For Mazda MX5 1.6 Ltr, B6 NA306, 1/89-12/93 1989-1993, Kit

    $162.30

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 18T x 20.5 mm, For Nissan Bluebird 2000-2005, 1.5 Ltr, QG15DE, 81kw FG10, 7/00-11/05, New Zea

    $299.76

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 24T x 25.4 mm, For Nissan 160B 1976-1980, 1.6 Ltr, L16 J810, 1/76-12/80, New Zealand Model, Kit

    $116.58

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 22T x 24.5 mm, For Ford Econovan 1979-1984, 1.6 Ltr SGMB, 1/79-12/84, 35mm Bearing ID, Kit

    $277.34

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 23T x 26.2 mm, For Ford Courier 2000-2002, 2.6 Ltr EFI, G6 PE, 6/00-10/02, Kit

    $269.58

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 44.8 mm, International Acco Series 1980-1985, 1950C, 1/80-12/85, Kit

    $1,450.00