Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: -12
  • Torque Capacity: Peak: 654Nm, Rated: 523Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB577
  • Alignment Tool: CAT154

    • Fitment:
  • Holden Frontera 1995-1999, 3.2 Ltr 24V, 6VD1, 151kw 4WD, 1/95-6/99
  • Holden Frontera 1999-2004, 3.2 Ltr 24V, 6VD1, 151kw 4WD, 7/99-6/04
  • Holden Jackaroo 1992-1998, 3.2 Ltr, 6VD1 UBS L2 4WD, 4/92-2/98
  • Holden Jackaroo 1992-1998, 3.2 Ltr, 6VD1 UBS25 4WD, 4/92-2/98
  • Holden Rodeo 1998-1998, 3.2 Ltr V6, 6VD1 R7, 2/98-6/98
  • Holden Rodeo 1998-2003, 3.2 Ltr V6, 6VD1 R9, 6/98-2/03
  • Holden Rodeo 1998-2003, 3.2 Ltr V6, 6VD1 TF (incl 4WD), 6/98-2/03
  • Isuzu Bighorn 1991-1998, 3.2 Ltr, 6VD1, 149kw UBS25GW, 12/91-1/98

    • More From This Category

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.5 mm, For Holden Commodore 3.0 Ltr, RB30E VL, 3/86-8/88 1986-1988, Kit

    Mantic Clutch Kit, Stage 4, Performance, 240 mm x 24T x 25.5 mm, For Holden Commodore 3.0 Ltr, RB30E VL, 3/86-8/88 1986-1988, Kit

    $515.15

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 24T x 25.2 mm, For Subaru,2007-on, 2.5 Ltr SOHC, EJ25I B13, 5 Speed, 4/07-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 24T x 25.2 mm, For Subaru,2007-on, 2.5 Ltr SOHC, EJ25I B13, 5 Speed, 4/07-, Kit

    $1,432.65

    View
    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 23T x 26.3 mm, For Mitsubishi Express 1986-1990, 2.0 Ltr, 4G63, 66kw SF, 10/86-10/9, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 23T x 26.3 mm, For Mitsubishi Express 1986-1990, 2.0 Ltr, 4G63, 66kw SF, 10/86-10/9, Kit

    $133.57

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 22.6 mm, Peugeot 207 2010-2011, 1.6 Ltr CRD Turbo, DV6C, 82kw 6 Speed, 6/10-7/11, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 22.6 mm, Peugeot 207 2010-2011, 1.6 Ltr CRD Turbo, DV6C, 82kw 6 Speed, 6/10-7/11, Kit

    $934.00

    View
    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 13T x 25.0 mm, For Mazda 1500-1800 1969-1972, 1.8 Ltr SVA, 1/69-12/72, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 13T x 25.0 mm, For Mazda 1500-1800 1969-1972, 1.8 Ltr SVA, 1/69-12/72, Kit

    $126.75

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits Sachs

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits Sachs

    $923.38

    View