Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 5 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY: Mantic Stage 5 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE - NON CUSHIONED, NON SPRUNG: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 5 Clutch Kits feature cerametallic friction material on both sides of the clutch plate, no segment cushioning and no hub springs. This results in a strong torque capacity increase compared with Stage 2 and more sudden engagement compared with Stage 3 or 4 kits. This type of configuration is not suitable for street use; but instead is finely tuned for the aggressive shifting required for various forms of motorsport. If you require a significant torque capacity increase, but still wish to drive your vehicle on the road, we recommend you purchase a Mantic Track multi plate clutch kit.

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic, No Cushion, Non Sprung (SC) Clutch Plate For Increased Torque capacity. Not for Daily Drive; Track Only., Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Heavy Duty SGI Cover Assembly
  • Full Cerametallic Clutch Plate, Non-Cushion, Non-Sprung
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 1028Nm, Rated: 823Nm

    • Fitment:
  • Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 276kw R33, 1/95-1/99, GTR 1995-1999
  • Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 208kw R34, 1/98-8/02, GTR 1998-2002

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 23T x 24.2 mm, For Audi A4 1997-2001, 1.8 Ltr Turbo, AJL, 132kw B5, 12/97-9/01, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 23T x 24.2 mm, For Audi A4 1997-2001, 1.8 Ltr Turbo, AJL, 132kw B5, 12/97-9/01, Kit

    $1,738.11

    View
    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 23T x 26.0 mm, For Ford Transit 2006-on, 2.4 Ltr TDI, 103kw VM, 5 Speed, 10/06-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 23T x 26.0 mm, For Ford Transit 2006-on, 2.4 Ltr TDI, 103kw VM, 5 Speed, 10/06-, Kit

    $1,606.22

    View
    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 21T x 29.0 mm, For Toyota Hilux 1991-1997, 2.8 Ltr Diesel, 3L LN81, 9/91-12/97, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 21T x 29.0 mm, For Toyota Hilux 1991-1997, 2.8 Ltr Diesel, 3L LN81, 9/91-12/97, Kit

    $152.92

    View
    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 24.5 mm, For Honda Prelude 1987-1991, 2.0 Ltr DOHC, B20A BA, 1/87-12/91, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 24T x 24.5 mm, For Honda Prelude 1987-1991, 2.0 Ltr DOHC, B20A BA, 1/87-12/91, Kit

    $185.33

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Jackaroo 1997-1998, 3.1 Ltr TDI, 4JG2 UBS69, 9/97-2/98, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Jackaroo 1997-1998, 3.1 Ltr TDI, 4JG2 UBS69, 9/97-2/98, Kit

    $405.76

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 22T x 24.3 mm, Ssangyong Musso 1998-2002, 2.9 Ltr TDI, OM662.920, 88kw 5 Speed, 7/98-12/02, To Suit OE S

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 22T x 24.3 mm, Ssangyong Musso 1998-2002, 2.9 Ltr TDI, OM662.920, 88kw 5 Speed, 7/98-12/02, To Suit OE S

    $199.22

    View