Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 4 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY: Mantic Stage 4 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process . CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE - NON CUSHIONED: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 4 Clutch Kits feature cerametallic friction material on both sides of the clutch plate, and no segment cushioning. This results in a strong torque capacity increase compared with Stage 2 and more sudden engagement compared with Stage 3 kits. This type of configuration is more suitable to rally and drift still driving; and less so for street driving. If you require a significant torque capacity increase, but still wish to drive your vehicle on the road, we recommend you purchase a Mantic Track multi plate clutch kit.

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic, No Cushion (SSC) Clutch Plate For Increased Torque capacity. Reduced Daily Driveability., Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Heavy Duty SGI Cover Assembly
  • Full Cerametallic Clutch Plate, Non-Cushion
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 870Nm, Rated: 696Nm

    • Fitment:
  • Nissan Cefiro 3.0 Ltr, VQ30DE, 164KW HA32, 8/94-11/98, New Zealand Only 1994-1998
  • Nissan Maxima 3.0 Ltr V6, VQ30DE A32, 1/95-12/99 1995-1999
  • Nissan Maxima 3.0 Ltr V6, VQ30DE, 166kw A33, 5 & 6 Speed, 1/00-12/03 2000-2003
  • Nissan Maxima 3.0 Ltr V6, VQ30DE J30, 1/91-12/94 1991-1994
  • Nissan Maxima 3.0 Ltr V6, VQ30E J30, 1/88-12/93 1988-1993
  • Nissan Maxima 3.0 Ltr V6 24V, VQ30DE J30, 1/95-12/99 1995-1999

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 24T x 25.5 mm, For Nissan Patrol 2001-2003, 4.8 Ltr EFI, TB48DE, 185kw GU II, 10/01-2/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 24T x 25.5 mm, For Nissan Patrol 2001-2003, 4.8 Ltr EFI, TB48DE, 185kw GU II, 10/01-2/03, Kit

    $480.54

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 20T x 22.0 mm, For Suzuki Liana 2001-2004, 1.6 Ltr, M16A 11/01-2/04, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 20T x 22.0 mm, For Suzuki Liana 2001-2004, 1.6 Ltr, M16A 11/01-2/04, Kit

    $152.80

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 24T x 25.5 mm, For Nissan 300ZX 1989-2000, 3.0 Ltr Twin Turbo, VG30DETT, 208kw Z32, 7/89-4/0, Kit

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 24T x 25.5 mm, For Nissan 300ZX 1989-2000, 3.0 Ltr Twin Turbo, VG30DETT, 208kw Z32, 7/89-4/0, Kit

    $244.80

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 255 mm x 10T x 27.5 mm, For Ford American Models 1962-1973, 260ci, V8 1/62-12/73, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 255 mm x 10T x 27.5 mm, For Ford American Models 1962-1973, 260ci, V8 1/62-12/73, Kit

    $326.42

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.3 mm, For Mazda For Mazda 6 2010-2012, 2.2 Ltr TDFI, R2, 132kw GH, 6 Speed, 3/10-11/12, Kit

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.3 mm, For Mazda For Mazda 6 2010-2012, 2.2 Ltr TDFI, R2, 132kw GH, 6 Speed, 3/10-11/12, Kit

    $1,377.76

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.0 Ltr DOHC, M 111.950, 95kw 113, 5 Speed, 3/97-7/03,

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.0 Ltr DOHC, M 111.950, 95kw 113, 5 Speed, 3/97-7/03,

    $1,603.19