This clutch kit is designed to replace the Original Equipment (OE) unit including the OE flywheel. This kit includes a solid steel flywheel (SMF).Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 3 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage 3 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 3 Clutch Kits feature cerametallic friction material on both sides of the clutch plate. This results in a strong torque capacity increase compared with Stage 2 - but reduced street driveability. Stage 3 kits include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic (SSCC) Clutch Plate For Increased Torque capacity featuring High Performance Engineered and Manufactured Friction Material, Concentric Slave Cylinder, Solid Mass Flywheel (SMF)

Features and Specifications
  • Mantic Heavy Duty SGI Cover Assembly
  • Full Cerametallic Clutch Plate
  • Includes Solid Mass Flywheel
  • Dual Mass Flywheel: Not Included
  • Solid Flywheel: Included
  • Concentric Slave Cylinder: Included
  • Spigot: RSB590
  • Alignment Tool: CAT191
  • Torque Capacity: Peak: 1222Nm, Rated: 977Nm

    • Fitment:
  • Chevrolet Camaro 5.7 Ltr, LS1 6 Speed, 1/98-12/02 1998-2002
  • Chevrolet Corvette 5.7 Ltr, LS1 C5, 6 Speed, 1/98-12/04 1998-2004
  • Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VT Series II, 6 Speed, 6/99-10/00 1999-2000
  • Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VU, 6 Speed, 1/01-9/02 2001-2002
  • Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VX, 6 Speed, 8/00-9/02 2000-2002
  • Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VY, 6 Speed, 9/02-7/04 2002-2004
  • Holden Commodore 5.7 Ltr, V8 GEN III, 250kw VZ, 6 Speed, 8/04-1/06 2004-2006
  • Holden Commodore 6.0 Ltr MPFI, Gen 4 (LS2), 260kw VZ, 6 Speed, 2/06-7/06 2006-2006
  • Holden Crewman 5.7 Ltr MPFI, 225kw Crew Cab Utility, VY, 6 Speed, 9/03-7/04 2003-2004
  • Holden Crewman 5.7 Ltr MPFI, 235kw Crew Cab Utility, VZ, 6 Speed, 9/05-7/06 2005-2006
  • Holden Monaro 5.7 Ltr, V8 GEN III, 225kw V2 Series I CV8, 6 Speed, 10/01-11/02 2001-2002
  • Holden Monaro 5.7 Ltr, V8 GEN III, 235kw V2 Series II CV8, 6 Speed, 12/02-7/03 2002-2003
  • Holden Monaro 5.7 Ltr, V8 GEN III, 245kw V2 Series III CV8, 6 Speed, 8/03-8/04 2003-2004
  • Holden Monaro 5.7 Ltr, V8 GEN III, 260KW VZ CV8, 6 Speed, 9/04-12/05 2004-2005
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 250kw VT, 6 Speed, 7/99-10/00 1999-2000
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 250kw VT R8, 6 Speed, 7/99-10/00 1999-2000
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 255kw VX, 6 Speed, 9/00-9/02 2000-2002
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 255kw VX R8, 6 Speed, 9/00-9/02 2000-2002
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 260kw VY, 6 Speed, 10/02-8/03 2002-2003
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 260kw VY R8, 6 Speed, 10/02-8/03 2002-2003
  • HSV Clubsport 5.7 Ltr, GEN III (LS1), 285kw VY R8, 6 Speed, 9/03-9/04 2003-2004
  • HSV Clubsport 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ, 6 Speed, 10/04-7/06 2004-2006
  • HSV Clubsport 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ R8, 6 Speed, 10/04-7/06 2004-2006
  • HSV Coupe 5.7 Ltr, GEN III (LS1), 285kw V2 GTO, 6 Speed, 9/03-9/04 2003-2004
  • HSV Coupe 5.7 Ltr, GEN III (LS1), 255kw V2 GTO, 6 Speed, 12/01-8/03 2001-2003
  • HSV Coupe 5.7 Ltr, GEN III (LS1), 300kw V2 GTS, 6 Speed, 4/04-9/04 2004-2004
  • HSV Coupe 5.7 Ltr, GEN III (LS1), 300kw V2 GTS, 6 Speed, 12/01-8/03 2001-2003
  • HSV Coupe 5.7 Ltr, GEN III (LS1), 270kw VZ, 6 Speed, 10/04-4/06 2004-2006
  • HSV Coupe 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ GTO, 6 Speed, 10/04-12/06 2004-2006
  • HSV Coupe 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ Signature, 6 Speed, 7/06-11/07 2006-2007
  • HSV GTS 5.7 Ltr, GEN III (LS1), 300kw VT, 6 Speed, 4/00-9/00 2000-2000
  • HSV GTS 5.7 Ltr, GEN III (LS1), 300kw VX, 6 Speed, 9/00-8/01 2000-2001
  • HSV GTS 5.7 Ltr, GEN III (LS1), 300kw VY, 6 Speed, 10/02-9/04 2002-2004
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 255kw VU, 6 Speed, 3/01-9/02 2001-2002
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 255kw VU R8, 6 Speed, 3/01-9/02 2001-2002
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 285kw VY, 6 Speed, 10/03-9/04 2003-2004
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 260kw VY, 6 Speed, 10/02-9/03 2002-2003
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 260kw VY R8, 6 Speed, 10/02-9/03 2002-2003
  • HSV Maloo 5.7 Ltr, GEN III (LS1), 285kw VY R8, 6 Speed, 10/03-9/04 2003-2004
  • HSV Maloo 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ, 6 Speed, 10/04-7/07 2004-2007
  • HSV Maloo 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ R8, 6 Speed, 10/04-9/07 2004-2007
  • HSV Senator 5.7 Ltr, GEN III (LS1), 250kw VT Signature, 6 Speed, 7/99-10/00 1999-2000
  • HSV Senator 5.7 Ltr, GEN III (LS1), 300kw VX 300, 6 Speed, 3/01-6/01 2001-2001
  • HSV Senator 5.7 Ltr, GEN III (LS1), 255kw VX Signature, 6 Speed, 9/00-9/02 2000-2002
  • HSV Senator 5.7 Ltr, GEN III (LS1), 260kw VY, 6 Speed, 10/02-8/03 2002-2003
  • HSV Senator 5.7 Ltr, GEN III (LS1), 285kw VY, 6 Speed, 9/03-9/04 2003-2004
  • HSV Senator 5.7 Ltr, GEN III (LS1), 260kw VY Signature, 6 Speed, 10/02-8/03 2002-2003
  • HSV Senator 5.7 Ltr, GEN III (LS1), 285kw VY Signature, 6 Speed, 9/03-9/04 2003-2004
  • HSV SV300 5.7 Ltr, GEN III (LS1), 300kw VX, 6 Speed, 9/01-12/01 2001-2001
  • HSV SV6000 6.0 Ltr MPFI, Gen 4 (LS2), 297kw VZ, 6 Speed, 8/05-4/06 2005-2006
  • HSV SV99 5.7 Ltr, GEN III (LS1), 250kw VT, 6 Speed, 7/99-4/00 1999-2000
  • Pontiac Firebird 350ci, LS1 6 Speed, 1/98-12/02 1998-2002
  • Pontiac GTO 5.7 Ltr, LS1 6 Speed, 1/04-12/04 2004-2004

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 22.6 mm, Peugeot 207 2009-2010, 1.6 Ltr CRD Turbo, DV6C, 82kw 6 Speed, 9/09-6/1, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 22.6 mm, Peugeot 207 2009-2010, 1.6 Ltr CRD Turbo, DV6C, 82kw 6 Speed, 9/09-6/1, Kit

    $1,381.20

    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 18T x 50.0 mm, For Nissan Diesel UD CGA Series 1987-1992, 12.0 Ltr TDI, PE6T CGA45, 1/87-12/92, Kit

    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 18T x 50.0 mm, For Nissan Diesel UD CGA Series 1987-1992, 12.0 Ltr TDI, PE6T CGA45, 1/87-12/92, Kit

    $575.63

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 50.8 mm, For Volvo F10 1979-1987, TD100B F10, SR62, 1/79-12/87, Kit

    PHC Clutch Clutch Kit, PHC Standard, 350 mm x 10T x 50.8 mm, For Volvo F10 1979-1987, TD100B F10, SR62, 1/79-12/87, Kit

    $3,395.64

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 230 mm x 22T x 24.5 mm, For Ford Laser 1990-1991, 1.8 Ltr 16V Turbo, BP(H) KF, 3/90-9/91, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 230 mm x 22T x 24.5 mm, For Ford Laser 1990-1991, 1.8 Ltr 16V Turbo, BP(H) KF, 3/90-9/91, Kit

    $579.17

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VT Series II, 6 Speed, 6/9

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Holden Commodore 5.7 Ltr, V8 GEN III, 225kw VT Series II, 6 Speed, 6/9

    $2,273.10

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Holden Commodore 6.0 Ltr MPFI, Gen 4 (LS2), 270KW VE Series II, 6 Spee

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Holden Commodore 6.0 Ltr MPFI, Gen 4 (LS2), 270KW VE Series II, 6 Spee

    $2,734.33