Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB545
  • Alignment Tool: CAT186
  • Torque Capacity: Peak: 646Nm, Rated: 517Nm

    • Fitment:
  • Holden Commodore 3.8 Ltr, V6 VN, M78, 8/88-12/90 1988-1990
  • Holden Commodore 3.8 Ltr, V6 VN Series II, M78, 1/91-9/91 1991-1991
  • Holden Commodore 3.8 Ltr EFI, V6 VG, 8/90-12/91 1990-1991
  • Holden Commodore 3.8 Ltr, V6 VP, M78, 10/91-7/93 1991-1993
  • Holden Commodore 3.8 Ltr, V6 VR, M78, 7/93-4/95 1993-1995
  • Holden Commodore 3.8 Ltr, V6 VS Series I, M78, 4/95-6/96 1995-1996
  • HSV LS 3.8 Ltr EFI, L27, 127kw VG, 5 Speed, 8/91-1/92 1991-1992
  • HSV LS 3.8 Ltr, L27, 127kw VP, M78, 2/92-6/93 1992-1993

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 20T x 21.8 mm, For Volvo S40-V40 1997-2000, 2.0 Ltr Turbo, B4204T, 118kw 11/97-7/00, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 20T x 21.8 mm, For Volvo S40-V40 1997-2000, 2.0 Ltr Turbo, B4204T, 118kw 11/97-7/00, Kit

    $440.91

    View
    PHC Clutch Clutch Kit, PHC Standard, 330 mm x 10T x 35.0 mm, For Mercedes Benz 811 1995-2001, OM364 1/95-12/01, 4WD, Kit

    PHC Clutch Clutch Kit, PHC Standard, 330 mm x 10T x 35.0 mm, For Mercedes Benz 811 1995-2001, OM364 1/95-12/01, 4WD, Kit

    $891.43

    View
    Mantic Clutch Kit, Stage 4, Performance, 300 mm x 26T x 29.0 mm, For Holden Commodore 6.0 Ltr MPFI, Gen 4 (LS2), 270KW VE, 6 Speed, 8/06-8/10 2006-201

    Mantic Clutch Kit, Stage 4, Performance, 300 mm x 26T x 29.0 mm, For Holden Commodore 6.0 Ltr MPFI, Gen 4 (LS2), 270KW VE, 6 Speed, 8/06-8/10 2006-201

    $1,401.80

    View
    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 28T x 22.1 mm, Seat Ibiza 1996-1999, 2.0 Ltr 16V MPFI, ABF, 110kw 7/96-4/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 28T x 22.1 mm, Seat Ibiza 1996-1999, 2.0 Ltr 16V MPFI, ABF, 110kw 7/96-4/99, Kit

    $722.63

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 18T x 20.8 mm, For Citroen C2 2003-on, 1.4 Ltr Hdi, DV4TD, 50kw 9/03-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 18T x 20.8 mm, For Citroen C2 2003-on, 1.4 Ltr Hdi, DV4TD, 50kw 9/03-, Kit

    $189.19

    View
    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/16 in. Input Shaft, 450 Horsepower, Organic, 1994-04 For Ford Mustang 3.8L, Kit

    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/16 in. Input Shaft, 450 Horsepower, Organic, 1994-04 For Ford Mustang 3.8L, Kit

    $676.52

    View