Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 621Nm, Rated: 497Nm

    • Fitment:
  • Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 208kw R32, 8/89-2/93, GTR 1989-1993

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, Eunos Eunos 30X 1993-1998, 1.8 Ltr V6, K8 EC1082, 11/93-12/98, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, Eunos Eunos 30X 1993-1998, 1.8 Ltr V6, K8 EC1082, 11/93-12/98, Kit

    $199.23

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 10T x 25.8 mm, For Chevrolet Luv 1972-1972, 1.6 Ltr 4 Cyl KB20, 3/72-12/72, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 10T x 25.8 mm, For Chevrolet Luv 1972-1972, 1.6 Ltr 4 Cyl KB20, 3/72-12/72, Kit

    $185.33

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.1 mm, For Holden Captiva 2011-2012, 2.4 Ltr, LE5, 123kw CG, 6 Speed, 1/11-5/12, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.1 mm, For Holden Captiva 2011-2012, 2.4 Ltr, LE5, 123kw CG, 6 Speed, 1/11-5/12, Kit

    $931.13

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 240 mm x 24T x 25.5 mm, For Nissan 180SX 1992-1998, 2.0 Ltr Turbo, SR20DT 12/92-12/98, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 240 mm x 24T x 25.5 mm, For Nissan 180SX 1992-1998, 2.0 Ltr Turbo, SR20DT 12/92-12/98, Kit

    $245.31

    View
    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, Iveco Eurocargo 2002-2003, 5.9 Ltr TDI, Tector 6 F4A, 176kw ML120 E24, 6 Speed, 1/02-5/03

    PHC Clutch Clutch Kit, PHC Standard, 380 mm x 10T x 44.8 mm, Iveco Eurocargo 2002-2003, 5.9 Ltr TDI, Tector 6 F4A, 176kw ML120 E24, 6 Speed, 1/02-5/03

    $2,532.50

    View
    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Corvette 6.2 Ltr, LT1, 339kw C7, 6 Speed, 1/14- 2014, Kit

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Corvette 6.2 Ltr, LT1, 339kw C7, 6 Speed, 1/14- 2014, Kit

    $2,058.60

    View