Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 697Nm, Rated: 557Nm

    • Fitment:
  • Nissan Skyline 2.6 Ltr Twin Turbo, RB26DETT, 208kw R32, 2/93-11/94, GTR 1993-1994

    • More From This Category

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 280 mm x 10T x 29.0 mm, For Buick 1970-1971, 455ci 4 Speed, 1/70-12/71, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 280 mm x 10T x 29.0 mm, For Buick 1970-1971, 455ci 4 Speed, 1/70-12/71, Kit

    $329.32

    View
    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.3 mm, For Porsche 928 1986-1988, 5.0 Ltr EFI, M28.42, 235kw 928 S4, 8/86-8/88, Kit

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.3 mm, For Porsche 928 1986-1988, 5.0 Ltr EFI, M28.42, 235kw 928 S4, 8/86-8/88, Kit

    $945.03

    View
    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.1 mm, For Mitsubishi Delica 1997-2006, 2.8 Ltr TDI, 4M40T, 102kw PD8W, 5 Speed, 7/97-12/06, Kit

    PHC Clutch Clutch Kit, PHC Standard, 250 mm x 23T x 26.1 mm, For Mitsubishi Delica 1997-2006, 2.8 Ltr TDI, 4M40T, 102kw PD8W, 5 Speed, 7/97-12/06, Kit

    $439.37

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.3 mm, For Porsche 911 1977-1990, 3.3 Ltr EFI Turbo Coupe, 930 Trans, 9/77-11/9, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.3 mm, For Porsche 911 1977-1990, 3.3 Ltr EFI Turbo Coupe, 930 Trans, 9/77-11/9, Kit

    $2,056.86

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 300 mm x 14T x 32.4 mm, For Toyota Landcruiser 2007-on, 4.5 Ltr V8 Diesel, 1VD-FTV, 151kw VDJ76, 4/07-

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 300 mm x 14T x 32.4 mm, For Toyota Landcruiser 2007-on, 4.5 Ltr V8 Diesel, 1VD-FTV, 151kw VDJ76, 4/07-

    $687.19

    View
    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Camaro 6.2 Ltr, LS3, 318kw 6 Speed, 3/09-12/15 2009-2015, Ki

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Chevrolet Camaro 6.2 Ltr, LS3, 318kw 6 Speed, 3/09-12/15 2009-2015, Ki

    $2,125.68

    View