Installing a new clutch is an exercise in frustration, mainly because you have to manhandle a giant transmission underneath your car. The last thing you want to do is have to start all over because the clutch plate slipped out of alignment and won't engage with the input shaft. Save yourself some time and effort and use a clutch alignment tool to make sure this does not happen to you. The tools are very simple, made from injection moulded plastic or nylon, you need the tool that matches your transmission. This is a matter of knowing the spline count on the input shaft. If the splines don't line up, it won't work. Do not try to fudge it with a tool that does not fully engage the spines. If your clutch alignment tool does not fit the pilot bearing/bushing, it is the wrong one, you need to get the correct one. On the back of the engine, the flywheel bolts to the crank. Inside the crank is a recess for the bearing. The tip of the clutch alignment tool locks into the bearing, keeping your clutch in place. First, insert the tool into the clutch plate. Make sure the clutch is facing the correct direction. The tool should stick all the way through the spines on the plate. Then place the clutch on the flywheel, and engage the alignment tool into the pilot bushing or bearing in the centre of the crankshaft. Push the clutch tight to the flywheel. The tool goes into the clutch plate, and then the tool is installed into the bearing on the flywheel. It should not move around at all. With the clutch on the flywheel, install the pressure plate to the flywheel and start the bolts. Wiggle the alignment tool to make sure it is fully engaged and seated in the pilot bushing/bearing. Tighten the pressure plate bolts in a criss-cross pattern and then torque to spec. The clutch alignment tool stays in the clutch until you are ready to install the transmission. While the pressure place should hold the clutch from moving, don't take the risk of pulling the tool out too soon. Once the transmission is ready to install, pop the tool out, and slide the transmission into place. Every application has a different clutch tool. These three tools look similar, and may even mesh together, but they are all different.

Features and Specifications
  • Clutch Industries (CI) Clutch Alignment Tool
  • Mandatory use on Clutch Installs
  • Ensure optimum clutch life and performance
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included

  • Fitment:
  • Honda Civic 1.5 Ltr, D15B ED, 1/88-12/89, Check Spline 1988-1989
  • Honda Civic 1.6 Ltr, D16A ED, 9/90-10/93 1990-1993
  • Honda Civic 1.5 Ltr, D15B ED, 9/90-10/93 1990-1993
  • Honda Civic 1.5 Ltr, D15B EG, 1/91-12/93 1991-1993
  • Honda Civic 1.3 Ltr, D13B EG, 1/91-12/93, Breeze 1991-1993
  • Honda Civic 1.6 Ltr DOHC, D16A EG, 1/91-12/93 1991-1993
  • Honda Civic 1.6 Ltr 16V SOHC, D16Y VTEC EH, 1/93-12/95 1993-1995
  • Honda Civic 1.5 Ltr 16V SOHC, D15B, 74kw EH, 10/93-10/95 1993-1995
  • Honda Civic 1.5 Ltr 16V SOHC, D15Z VTEC-E EH Vei, 1/93-12/95 1993-1995
  • Honda Civic 1.6 Ltr 16V SOHC, D16 VTEC EH Vti, 1/93-12/95 1993-1995
  • Honda Civic 1.5 Ltr SOHC, D15B EH, 1/93-12/95, Breeze 1993-1995
  • Honda Civic 1.6 Ltr SOHC, D16Y8 EJ, 3/96-3/99 1996-1999
  • Honda Civic 1.6 Ltr DOHC, D16A EK VTi-R, 1/93-12/95 1993-1995
  • Honda Civic 1.3 Ltr, D13B, 67kw EK, 9/95-8/00, New Zealand Model 1995-2000
  • Honda Civic 1.6 Ltr SOHC, D16Y4 EK, 10/99-3/00 1999-2000
  • Honda Civic 1.5 Ltr, D15B, 77kw ES1, 9/00-8/05, New Zealand Model 2000-2005
  • Honda Civic 1.5 Ltr, D15Y ES8, 1/01-12/06, New Zealand Model 2001-2006
  • Honda Civic 1.7 Ltr SOHC, D17ZI, 88kw ES, 11/00-2/02 2000-2002
  • Honda Civic 1.7 Ltr MPFI, D17A2, 96kw EU, 5 Speed, 6/02-6/06 2002-2006
  • Honda Concerto 1.6 Ltr, D16 MA2, 11/88-12/92
  • More From This Category

    TCI Input Shaft, Hardened, Vaccu Melt 300, 1.82 Carrier, Turbo Spline, 12.625 in. Length, GM, Powerglide, Each

    TCI Input Shaft, Hardened, Vaccu Melt 300, 1.82 Carrier, Turbo Spline, 12.625 in. Length, GM, Powerglide, Each

    $444.29

    Motive Gear Differential Carrier Bearing Kit, Koyo, For Ford EXCURSION 2000–2005, Kit

    Motive Gear Differential Carrier Bearing Kit, Koyo, For Ford EXCURSION 2000–2005, Kit

    $149.77

    PHC Clutch Bearing, Release, For Ford Econovan 1.3 Ltr 1/79-12/84 1979-1984, Each

    PHC Clutch Bearing, Release, For Ford Econovan 1.3 Ltr 1/79-12/84 1979-1984, Each

    $68.53

    TCI 4R70W Bushing Kit.

    TCI 4R70W Bushing Kit.

    $161.54

    Motive Gear Differential Bearing Kit, Koyo, For CHEVROLET CAMARO 2010–2015, Kit

    Motive Gear Differential Bearing Kit, Koyo, For CHEVROLET CAMARO 2010–2015, Kit

    $224.25