Designed and manufactured to replace the clutch system installed as Original Equipment, a 4Terrain Ultimate replacement clutch kit offers the ultimate torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED 4TERRAIN OFF ROAD COVER ASSEMBLY: 4x4 systems need a higher torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal 4x4 clutch system must also have improved heat dissipation. 4Terrain cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Also featuring the ER2 grooved cover which increase torque capacity while also increase heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all 4Terrain cover assemblies undergo a 2 stage balancing process. 4TERRAIN DUAL FRICTION CLUTCH PLATE: 4Terrain Ultimate Clutch Kits feature a dual friction clutch plate. Organic material on the flywheel side is replaced with Aramid, the same material used in bulletproof vests, for improved fade resistance and increased torque capacity due to a higher coefficient of friction. 4Terrain Ultimate plates are the ultimate for your 4x4.

This kit includes : 4TERRAIN ER2 Heavy Duty Cover Assembly, 4Terrain Aramid Dual Friction, High Torque, Clutch Plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Patented ER2 High Torque SGI Cover Assembly
  • Aramid Dual Friction Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB501 & RSB504
  • Alignment Tool: CAT100
  • Torque Capacity: Peak: 537Nm, Rated: 430Nm

    • Fitment:
  • Mitsubishi Triton 2.5 Ltr TDI, 4D56, 100kw ML, 5 Speed, 2/08-8/09, RWD 2008-2009
  • Mitsubishi Triton 3.5 Ltr MPFI, V6 6G74, 135kw ML, 5 Speed, 7/06-8/09, 4WD 2006-2009
  • Mitsubishi Triton 3.5 Ltr MPFI, V6 6G74, 135kw ML, 5 Speed, 7/06-8/09, RWD 2006-2009
  • Mitsubishi Triton 2.5 Ltr TDI, 4D56, 100kw ML, 5 Speed, 2/08-8/09, 4WD 2008-2009
  • Mitsubishi Triton 2.5 Ltr TDI, 4D56, 100kw MN, 5 Speed, 9/09-, RWD 2009
  • Mitsubishi Triton 2.5 Ltr TDI, 4D56, 100kw MN, 5 Speed, 9/09-, 4WD 2009

    • More From This Category

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 255 mm x 10T x 28.0 mm, For Toyota Landcruiser with Eng Conversion 1974-on, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 255 mm x 10T x 28.0 mm, For Toyota Landcruiser with Eng Conversion 1974-on, Kit

    $542.13

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 190 mm x 20T x 22.8 mm, For Ford Laser 1981-1983, 1.5 Ltr, E5 KA, 3/81-3/83, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 190 mm x 20T x 22.8 mm, For Ford Laser 1981-1983, 1.5 Ltr, E5 KA, 3/81-3/83, Kit

    $239.79

    View
    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 20T x 22.4 mm, For Hyundai i40 2011-on, 2.0 Ltr DOHC, G4NC, 130kw VF, 6 Speed, 9/11-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 20T x 22.4 mm, For Hyundai i40 2011-on, 2.0 Ltr DOHC, G4NC, 130kw VF, 6 Speed, 9/11-, Kit

    $923.38

    View
    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 40.0 mm, MAN 08 Series 1970-1972, 8.156H, 1/70-12/72, Kit

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 40.0 mm, MAN 08 Series 1970-1972, 8.156H, 1/70-12/72, Kit

    $539.55

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits LUK F

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 28T x 30.6 mm, For Audi A4 2008-2012, 2.0 Ltr CRD Turbo, CAGA, 105kw B8, 6 Speed, 9/08-6/12, Suits LUK F

    $1,439.19

    View