Designed and manufactured to replace the clutch system installed as Original Equipment, a 4Terrain Ultimate replacement clutch kit offers the ultimate torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED 4TERRAIN OFF ROAD COVER ASSEMBLY: 4x4 systems need a higher torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal 4x4 clutch system must also have improved heat dissipation. 4Terrain cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Also featuring the ER2 grooved cover which increase torque capacity while also increase heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all 4Terrain cover assemblies undergo a 2 stage balancing process. 4TERRAIN DUAL FRICTION CLUTCH PLATE: 4Terrain Ultimate Clutch Kits feature a dual friction clutch plate. Organic material on the flywheel side is replaced with Aramid, the same material used in bulletproof vests, for improved fade resistance and increased torque capacity due to a higher coefficient of friction. 4Terrain Ultimate plates are the ultimate for your 4x4.

This kit includes : 4TERRAIN ER2 Heavy Duty Cover Assembly, 4Terrain Aramid Dual Friction, High Torque, Clutch Plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Patented ER2 High Torque SGI Cover Assembly
  • Aramid Dual Friction Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: 0.5
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT180
  • Torque Capacity: Peak: 392Nm, Rated: 313Nm

  • Fitment:
  • Toyota 4 Runner 2.4 Ltr Diesel, 2L LN60, 11/83-8/88 1983-1988
  • Toyota 4 Runner 2.0 Ltr, 3Y YN60, 11/83-12/85, some models 1983-1985
  • Toyota 4 Runner 2.4 Ltr, 22R YN63, 5/89-10/89 1989-1989
  • Toyota Blizzard 2.2 Ltr, L LD10, 1/82-12/83 1982-1983
  • Toyota Bundera 2.4 Ltr TDI, 2L-T LJ70, 10/85-3/90 1985-1990
  • Toyota Bundera 2.4 Ltr TDI, 2L-T LJ70, 11/84-10/85 1984-1985
  • Toyota Bundera 2.4 Ltr TDI, 2L-T LJ71, 11/84-10/85 1984-1985
  • Toyota Bundera 2.4 Ltr, 22R RJ70, 1/85-8/88 1985-1988
  • Toyota Chaser 2.4 Ltr TDI, 2L-T LX70, 1/84-12/88 1984-1988
  • Toyota Hilux 2.2 Ltr Diesel, L LN40, 9/80-8/85 1980-1985
  • Toyota Hilux 2.2 Ltr Diesel, L LN46, 10/81-8/85 1981-1985
  • Toyota Hilux 2.2 Ltr Diesel, L LN55, 11/83-8/85 1983-1985
  • Toyota Hilux 2.4 Ltr Diesel, 2L LN56, 8/85-9/88 1985-1988
  • Toyota Hilux 2.4 Ltr Diesel, 2L LN60, 11/83-8/88 1983-1988
  • Toyota Hilux 2.4 Ltr Diesel, 2L LN65, 11/83-8/88 1983-1988
  • Toyota Hilux 2.0 Ltr, 18R RN31 (incl 4WD), 9/80-10/83 1980-1983
  • Toyota Hilux 2.0 Ltr, 18R RN36 (incl 4WD), 9/80-10/83 1980-1983
  • Toyota Hilux 2.0 Ltr, 18R RN41 (SR5), 9/80-10/83 1980-1983
  • Toyota Hilux 2.0 Ltr, 18R RN46 (incl 4WD), 9/80-10/83 1980-1983
  • Toyota Hilux 1.8 Ltr, 2Y YN56, 11/83-8/88 1983-1988
  • Toyota Hilux 2.2 Ltr, 4Y YN58, 8/86-7/88 1986-1988
  • Toyota Hilux 2.0 Ltr, 3Y YN65, 11/83-12/85, some models 1983-1985
  • Toyota Landcruiser 2.4 Ltr TDI, 2L-T LJ70, 11/84-10/85 1984-1985
  • Toyota Landcruiser 2.4 Ltr TDI, 2L-T LJ71, 11/84-10/85 1984-1985
  • Toyota Landcruiser 2.4 Ltr, 22R RJ70, 1/85-8/88 1985-1988
  • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 18T x 50.0 mm, For Nissan Diesel UD CGA Series 1987-1992, 12.0 Ltr TDI, PE6T CGA45, 1/87-12/92, Kit

    PHC Clutch Clutch Kit, PHC Standard, 430 mm x 18T x 50.0 mm, For Nissan Diesel UD CGA Series 1987-1992, 12.0 Ltr TDI, PE6T CGA45, 1/87-12/92, Kit

    $575.63

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.0 mm, For Saab 9-3 2002-on, 2.0 Ltr MPFI Turbo, B207R, 154kw 5 Speed, 9/02-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 14T x 25.0 mm, For Saab 9-3 2002-on, 2.0 Ltr MPFI Turbo, B207R, 154kw 5 Speed, 9/02-, Kit

    $926.53

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.2 mm, For Ford Mondeo 2007-on, 2.0 Ltr, Duratec, 107kw MA, 5 Speed, 10/07-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 26.2 mm, For Ford Mondeo 2007-on, 2.0 Ltr, Duratec, 107kw MA, 5 Speed, 10/07-, Kit

    $1,653.29

    View
    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 21T x 29.8 mm, For Toyota Prado 2004-2009, 3.0 Ltr TDI, 1KD-FTV, 127kw KDJ120, 6 Speed, 8/04-7/09, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 21T x 29.8 mm, For Toyota Prado 2004-2009, 3.0 Ltr TDI, 1KD-FTV, 127kw KDJ120, 6 Speed, 8/04-7/09, Kit

    $656.31

    View
    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 26T x 22.8 mm, For Citroen DS3 2010-2015, 1.6 Ltr Turbo, EP6DT, 115kw Dsport, 6 Speed, 4/10-7/15, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 26T x 22.8 mm, For Citroen DS3 2010-2015, 1.6 Ltr Turbo, EP6DT, 115kw Dsport, 6 Speed, 4/10-7/15, Kit

    $614.03

    View
    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 275 mm x 24T x 25.5 mm, For Nissan Navara 2015-on, 2.3 Ltr TDI, YS23DDT, 120kw D23 NP300, 11/15-, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 275 mm x 24T x 25.5 mm, For Nissan Navara 2015-on, 2.3 Ltr TDI, YS23DDT, 120kw D23 NP300, 11/15-, Kit

    $456.44

    View