COMP Cams Dual Energy camshafts have more exhaust duration and lift than intake. They're designed for applications where a slight sacrifice in low-end power is acceptable for an increase in mid- and upper-range rpm horsepower. These cams are ideal for use with restricted exhaust port cylinder heads, or applications using a full-length exhaust system. Select the model and options designed for your vehicle and engine application. Overview : - Cam Style: Hydraulic flat tappet - Basic Operating RPM Range: 2,000-6,000 - Intake Duration at 050 inch Lift: 219 - Exhaust Duration at 050 inch Lift: 233 - Duration at 050 inch Lift: 219 int./233 exh. - Advertised Intake Duration: 275 - Advertised Exhaust Duration: 283 - Advertised Duration: 275 int./283 exh. - Intake Valve Lift with Factory Rocker Arm Ratio: 0.477 - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 - Valve Lift with Factory Rocker Arm Ratio: 0.477 int./0.510 exh. - Lobe Separation (degrees): 110 - Computer-Controlled Compatible: No - Grind Number: FW 275DEH-10 - Valve Springs Required: Yes

More From This Category

COMP Cams Camshaft, Magnum, Hydraulic Flat Cam, Advertised Duration 270/270, Lift 0.5/0.5, For Ford 351W, Each

COMP Cams Camshaft, Magnum, Hydraulic Flat Cam, Advertised Duration 270/270, Lift 0.5/0.5, For Ford 351W, Each

$432.16

View
Crow Cams Camshaft, Ford Windsor 351 V8 Hydraulic, Adv. Duration 294/307, Valve Lift 0.567/0.575

Crow Cams Camshaft, Ford Windsor 351 V8 Hydraulic, Adv. Duration 294/307, Valve Lift 0.567/0.575

$331.90

View
Crow Cams Camshaft, Ford Windsor V8 Hydraulic, Adv. Duration 280/290, Valve Lift 0.475/0.502

Crow Cams Camshaft, Ford Windsor V8 Hydraulic, Adv. Duration 280/290, Valve Lift 0.475/0.502

$331.90

View