Finally, an affordable Coyote intake manifold that also performs! The Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits include fuel rails for use with OEM type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, both manifolds have a 9.20-inch runner length and are designed to improve the mid to high RPM powerband.
The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold, plus clears 2015-2023 Mustang factory hoods. Offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150x66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-2023 GT throttle bodies can be used with the optional 717-18 adaptor.

The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20% more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration.

Features:
Finally, an affordable Coyote intake manifold that also performs! The Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits include fuel rails for use with OEM type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, both manifolds have a 9.20-inch runner length and are designed to improve the mid to high RPM powerband.
The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold, plus clears 2015-2023 Mustang factory hoods. Offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150x66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-2023 GT throttle bodies can be used with the optional 717-18 adaptor.

The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20% more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration.

More From This Category

Holley Intake Manifold, EFI, Single Plane, 5.417/5.417 in. Height, 2500-7000 RPM, GM LS3/L92, Satin, Each

Holley Intake Manifold, EFI, Single Plane, 5.417/5.417 in. Height, 2500-7000 RPM, GM LS3/L92, Satin, Each

$716.21

View
Edelbrock VALLEY PLATE, VALLEY PLATE SBC SB2 STD DECK

Edelbrock VALLEY PLATE, VALLEY PLATE SBC SB2 STD DECK

$808.56

View
Edelbrock Intake Manifold, Performer, Dual Plane, Aluminium, Natural, Square/Spread Bore, For Chevrolet, Small Block, Each

Edelbrock Intake Manifold, Performer, Dual Plane, Aluminium, Natural, Square/Spread Bore, For Chevrolet, Small Block, Each

$606.88

View
Edelbrock Intake Manifold, Super Victor, EFI, 4150 Style Throttle Bodies, Aluminium, Natural, Multi Port, LS3, Each

Edelbrock Intake Manifold, Super Victor, EFI, 4150 Style Throttle Bodies, Aluminium, Natural, Multi Port, LS3, Each

$1,066.47

View
Dart Big Block Box Ram Manifold

Dart Big Block Box Ram Manifold

$2,210.32

View
Edelbrock Manifold, EFI, Pro-Flo XT, Aluminium, Natural, For Chevrolet, Small Block, Each

Edelbrock Manifold, EFI, Pro-Flo XT, Aluminium, Natural, For Chevrolet, Small Block, Each

$998.53

View