The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application.

The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options.

For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

Features:
The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application.

The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options.

For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

More From This Category

Edelbrock INTAKE MANIFOLD, XX MANIFOLD VICTOR BIG VICTOR EFI BBC W/BIG CHIEF OR BIG DUKE CYL HEADS 10.2in. DECK DOMINATOR FLANGE SM PORT

Edelbrock INTAKE MANIFOLD, XX MANIFOLD VICTOR BIG VICTOR EFI BBC W/BIG CHIEF OR BIG DUKE CYL HEADS 10.2in. DECK DOMINATOR FLANGE SM PORT

$1,020.81

View
Edelbrock Intake Manifold, Performer, Dual Plane, Aluminium, Natural, Square/Spread Bore, For Oldsmobile, 307-403, Each

Edelbrock Intake Manifold, Performer, Dual Plane, Aluminium, Natural, Square/Spread Bore, For Oldsmobile, 307-403, Each

$787.23

View
Edelbrock Intake Manifold, Victor Jr., Single Plane, Aluminium, Natural, Square Bore, For Chevrolet, Small Block, Each

Edelbrock Intake Manifold, Victor Jr., Single Plane, Aluminium, Natural, Square Bore, For Chevrolet, Small Block, Each

$707.72

View
Edelbrock SB2 Manifold for Non-restricted (open) Applications (NASCAR)

Edelbrock SB2 Manifold for Non-restricted (open) Applications (NASCAR)

$1,038.82

View
Trick Flow Engine Steam Line Plumbing Kit, Front Kit, Aluminum, Black Anodized, For Chevrolet, Small Block LS, Kit

Trick Flow Engine Steam Line Plumbing Kit, Front Kit, Aluminum, Black Anodized, For Chevrolet, Small Block LS, Kit

$197.51

View