Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines.

The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more!

The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations.

The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.

Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.

Features:
Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines.

The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more!

The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations.

The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.

Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.

More From This Category

Holley Intake Manifold, Injected, Satin, 95mm, Top Section, Side Mount Throttle Body, For Ford, Kit

Holley Intake Manifold, Injected, Satin, 95mm, Top Section, Side Mount Throttle Body, For Ford, Kit

$765.07

Edelbrock Intake Manifold, Performer RPM, Dual Plane, Natural, Square Bore, For Ford, Clevor, 351W Block Cleveland 4V Heads

Edelbrock Intake Manifold, Performer RPM, Dual Plane, Natural, Square Bore, For Ford, Clevor, 351W Block Cleveland 4V Heads

$687.93

Edelbrock Intake Manifold Performer RPM Air Gap Dual Quad Aluminium Natural Square Bore For Chevrolet Big Block Each

Edelbrock Intake Manifold Performer RPM Air Gap Dual Quad Aluminium Natural Square Bore For Chevrolet Big Block Each

$770.92

Edelbrock Intake Manifold, Victor, Single Plane, Aluminium, Natural, Square Bore, For Chevrolet, 302/327/350/400, Each

Edelbrock Intake Manifold, Victor, Single Plane, Aluminium, Natural, Square Bore, For Chevrolet, 302/327/350/400, Each

$689.07