Davies Craig Electric Booster Pump, EBP40, 12V, Plastic, Black, Kit
$216.56
$288.75
Only 2 left
25% OFF
Davies Craig Water Pump, Remote Electric, 141LPM/37GPM, EWP140, 12V, Kit
Part Number:DC-8090
$300.18
SAVE $100.06 (25%)
Low stock - Only 2 left
or buy now, pay later with
EWP®140 (Black) Kit Remote Electric Water Pump (12V) (Part #8090)
The EWP®140 Electric Water Pump delivers 147 litres per minute of coolant flow, ideal for larger, high-horsepower, turbocharged, or supercharged engines. This pump enhances engine cooling control and efficiency while delivering increased power and torque.
Designed for universal engine fitment, the EWP®140 can replace or complement mechanical water pumps, eliminating parasitic power losses and freeing up to 10kW (13hp). It is also widely used in intercooler applications and high-performance setups.
KIT CONTENTS |
|
| Part Description | Units |
| EWP®140 (Black) - Alloy Pump 12V Assembly | 1 |
| Red Wire Joiner | 1 |
| Screw - Self Tap 8x3/8 BZ | 1 |
| Red 6mm Ring Terminal | 1 |
| 5x12 Flanged Hex Set Screw Zinc Silver | 12 |
| Relay - 12V 40 Amp 5 Pin with Resistor Protection | 1 |
| Adapter Alloy 90° 38mm (1½") | 1 |
| Adapter Alloy Straight 38mm (1½") | 1 |
| EWP Adapter O-Ring | 2 |
| Hose Clamps | 2 |
| EWP Basic Pump Loom | 1 |
TECHNICAL SPECIFICATIONS |
|
| Voltage | 12 Volt Pump |
| Operating Voltage | 3V DC to 15V DC |
| Maximum Current | 10A @ 13V |
| Flow Rate (Max) | 147 L/min (38.8 US gal/min) @ 13V DC |
| Operating Temp. | -40°C to 120°C (-40°F to 248°F) |
| Pump Weight | 1226 grams (2.7 lbs) |
| Pump Material | Aluminum (Powder Coated) |
| Burst Pressure | 500 kPa (72.5 PSI) |
| Seal | Ceramic Face Seal |
| Fits Hose Sizes | 35mm to 51mm (1?" to 2") |
EWP & Controller Installation Demonstration
More From This Category
Davies Craig Water Pump, Remote Electric, 150LPM/40GPM, EWP150, 24V w/ Controller, Kit
$465.96
$621.28
25% OFF
Davies Craig Electric Booster Pump, EBP23, 12V, Plastic, Black, Kit
$136.87
$182.49
Only 2 left
25% OFF
